Instruction/ maintenance manual of the product SPA400 Linksys
Go to page of 8
Linksys SPA400 Trixbox Integration Guide Access Point – Connecting You & Your Customers. Contact : support@voipshop.com.au.
Overview: The Linksys SPA400 is a 4 Line FXO gateway capable of connecting 4 PSTN lines to your asterisk system to make and receive calls. This guide is a step by step on how to configure Trixbox to utilize the features of the SPA400. Limitations: * The voicemail function of the SPA400 cannot be used.
Step 3 – Set the SPA400 to a Fixed IP address Asterisk needs to access your SPA400, so it needs to be set to a fixed ip address. To do this: - Under Setup -> Basic Setup • Select Fixed IP address and ente r a valid fixed IP address for your network.
Step 4 – Setup the SPA400 Voice Configuration. Open the SPA400 in your web browser using the new IP address. Select Setup->SPA9000 Interface. • Enter SPA400 in the User ID: • Leave SPA9000 on.
For Australia you need to change:- • Impedance : 220 Ohms + (820 Ohms || 120nF) • On-Hook speed : 26ms.
Step 5 – Configure Trixbox Trunk. Open your FreePBX interface: http://trixbox.ip/admin/ Select Trunks -> Add SIP trunk Complete the form with the details below: ----------------------------------.
Step 6 – Configure Outbound Rout e. You can now treat the SPA400 like any other trunk. To add an outbound router (eg, dial 9 to dial out the SPA400) Outbound Routes -> Add Route Route Name: SPA400PSTN (this can be anything) Route Password: Blank Emergency Dialing: Unticked Intra Company Route: Unticked Dial Patterns: 9|.
Complete: You should now be able to ma ke and receive calls via your SPA400. Email support@voipshop.com.au for further support if required. Congratulations Notes: SPA400 IP Addre ss: _________________.
An important point after buying a device Linksys SPA400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linksys SPA400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linksys SPA400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linksys SPA400 you will learn all the available features of the product, as well as information on its operation. The information that you get Linksys SPA400 will certainly help you make a decision on the purchase.
If you already are a holder of Linksys SPA400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linksys SPA400.
However, one of the most important roles played by the user manual is to help in solving problems with Linksys SPA400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linksys SPA400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
