Instruction/ maintenance manual of the product Processor Cage and Clips Apple
Go to page of 15
07 3-1 25 3 Rev . A 1 © 2009 Apple Inc . All rights reserved. Mac P ro F irst Steps Shut down computer . 1 2 W ait 1 0 minutes. W arning: Parts inside computer can be very hot. Allow comput er to cool down bef ore continuing . Unplug all external 3 cables exc ept power cord .
07 3-1 25 3 Rev . A 2 © 2009 Apple Inc . All rights reserved. Required T ools Phillips #2 screwdriver • RIght-angle, 2.5 mm • hex driver Flatblade scr ewdriver • Long-handled Phillips • #1 sc.
07 3-1 25 3 Rev . A 3 © 2009 Apple Inc . All rights reserved. Graphics Car d 3 Locate gr aphics card in slot 1 . 4 Using Phillips #1 screwdriver , lo osen 2 captive screws securing card’ s bracket to enclosure.
07 3-1 25 3 Rev . A 4 © 2009 Apple Inc . All rights reserved. Note: Card is held in place by reten tion bar . F ollowing two steps explain how to release bar .
07 3-1 25 3 Rev . A 5 © 2009 Apple Inc . All rights reserved. 8 Holding card by top corners, pull it up out of slot. Remove card fr om 9 computer . Checklist for handling card: When removing or installing card , handle it only by the edge s. D o not touch its connectors • or any components .
07 3-1 25 3 Rev . A 6 © 2009 Apple Inc . All rights reserved. P rocessor T ray 1 0 Locate pr ocessor tray . 1 1 Pr ess down and release 2 latches on front of proce ssor tray .
07 3-1 25 3 Rev . A 7 © 2009 Apple Inc . All rights reserved. 1 2 Holding tray by latches , lift it out of computer . Place tray DIMM side 1 3 up on soft, clean cloth.
07 3-1 25 3 Rev . A 8 © 2009 Apple Inc . All rights reserved. 1 5 Remove 2 screws . Slide fan up and out 1 6 of computer . P rocessor C age and Clips 1 7 Locate pr ocessor cage.
07 3-1 25 3 Rev . A 9 © 2009 Apple Inc . All rights reserved. 1 8 Disconnect 3 cables from logic board . Using long-handled 1 9 Phillips #1 screwdriv er , loosen 6 captive screws. Rotate computer to 20 stand vertically . Using 2.5 mm hex driver , remove 5 mushr oom- head screws.
07 3-1 25 3 Rev . A 10 © 2009 Apple Inc . All rights reserved. 24 Lift cage out of enclosure. Installing Replacement Clips 1 If you are replacing just the processor cage clips, and not the cage, locate clips on bottom of cage. Release fan cables 2 from clips.
07 3-1 25 3 Rev . A 11 © 2009 Apple Inc . All rights reserved. T ransferring Cage F ans If you are replacing the processor cage with a new cage, you must transfer the front and rear cage fans to the new cage. Locate pr ocessor cage 1 fans. 2 Release fan cables from clips on bottom of processor cage .
07 3-1 25 3 Rev . A 12 © 2009 Apple Inc . All rights reserved. 3 Release 4 latches on front fan and slide fan out of cage. Note: Latch #4 is on inside of cage.
07 3-1 25 3 Rev . A 13 © 2009 Apple Inc . All rights reserved. PCIe F an 6 Slide fan into enclosure so that fan tabs engage with slots on metal cage. Pr ess down until fan 7 clicks into place in connector . Replace 8 2 screws. P rocessor T ray 9 Holding tray by latches , lower it in to processor cage .
07 3-1 25 3 Rev . A 14 © 2009 Apple Inc . All rights reserved. Graphics Car d 1 1 Reinstall graphics card in slot 1 . Note: Align card’ s connector with expansion slot and press down un til connector is inser ted all the way int o slot.
07 3-1 25 3 Rev . A 15 © 2009 Apple Inc . All rights reserved. Closing the C omputer 1 Replace access panel. Note: Make sure latch is up befor e you replace panel. If latch is down, panel will not seat correctly . Push latch do wn 2 to close and secure access panel.
An important point after buying a device Apple Processor Cage and Clips (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apple Processor Cage and Clips yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apple Processor Cage and Clips - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apple Processor Cage and Clips you will learn all the available features of the product, as well as information on its operation. The information that you get Apple Processor Cage and Clips will certainly help you make a decision on the purchase.
If you already are a holder of Apple Processor Cage and Clips, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apple Processor Cage and Clips.
However, one of the most important roles played by the user manual is to help in solving problems with Apple Processor Cage and Clips. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apple Processor Cage and Clips along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
