Instruction/ maintenance manual of the product LKG0F755E Linksys
Go to page of 7
Getting the most from your Maxtor OneTouch TM USB hard drive and Linksys Network Storage Link Share your OneTouch drive with everyone on your network. With the Linksys Network Storage Link, you can now use your Maxtor OneTouch USB hard drive as a network hard drive.
2 Installing the Network Storage Link and OneTouch Drive Connecting the Network Storage Link to Your Network 1. Connect one end of an Ethernet cable to the Ethernet port on the back of the Network Storage Link. 2. Connect the other end of the Ethernet cable to your router.
3 11. Turn on the Network Storage Link by pressing its front panel button. The Network Storage Link may take up to three minutes to completely power up. During this time, the Ready/Status light will flash. When the Ready/Status light stops flashing and remains solid green, the Network Storage Link is ready for use.
4 as you will need it to use your networked OneTouch drive after formatting. 16. Click Administration . A window will open, asking you to enter your user name and password. 17. Enter admin for both user name and password and click OK . The LAN page will appear.
5 The Map Network Drive window will appear. 2. In the Folder (or Path) box enter the IP address of your Network Storage Link, followed by Disk 1 using this format: IP addressDisk 1 . For example: 192.168.1.77Disk 1 Note: Make sure there is a space between “Disk” and “1” in the IP address.
6 Note: When you have completed the software installation, do not proceed to the “Connecting the Drive” or “Setting up the Maxtor OneTouch Feature” sections. For step-by-step directions on how to back up your entire computer system using Retrospect, see the following section.
7 10. Click Advanced . A window will open, asking you to enter the UNC path for the volume. 11. Enter the IP address of your Network Storage Link, followed by Disk 1 using this format: IP addressDisk 1 .
An important point after buying a device Linksys LKG0F755E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linksys LKG0F755E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linksys LKG0F755E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linksys LKG0F755E you will learn all the available features of the product, as well as information on its operation. The information that you get Linksys LKG0F755E will certainly help you make a decision on the purchase.
If you already are a holder of Linksys LKG0F755E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linksys LKG0F755E.
However, one of the most important roles played by the user manual is to help in solving problems with Linksys LKG0F755E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linksys LKG0F755E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
