Instruction/ maintenance manual of the product AM300 Linksys
Go to page of 7
Linksys AM300 Quick Configuration Page 1 of 7 What tools are used to complete the task? This User Guide provides step- by-step instructions on how to configure a Linksys AM300 modem using the quick configuration utility.
Linksys AM300 Quick Configuration 2 1 In the Internet Explorer screen complete the following steps: 1 1 In the Address field enter : Ethernet:/USB = 192.168.1.1 Note: USB drivers must be installed first before proceeding with this userguide. 2 2 Click .
Linksys AM300 Quick Configuration 3 2 1 In the Log In screen, complete the following steps: 1 1 In the Username field enter: admin. 2 2 In the Password field enter: admin.
Linksys AM300 Quick Configuration 5 6 2 3 4 1 In the Setup screen, complete the following steps: 1 1 From the Encapsulation drop down menu select RFC 2364 PPPoA. Note: The page will refresh to include the PPPoA section. 2 2 Ensure the VPI is set at 8 and the VCI is set at 35 from the Virtual Circuit ID: field.
Linksys AM300 Quick Configuration 1 2 Scroll down the Setup screen, complete the following steps: 1 1 From the Timezone drop down menu select the time zone applicable to the state you are in.
Linksys AM300 Quick Configuration In the Settings are successful screen, complete the following step: 1 1 Allow up to 25 seconds for the previous page to load.
Linksys AM300 Quick Configuration 2 1 In the Status screen, complete the following steps: 1 1 Click on Status. 2 2 Ensure the PPP Login field is displayed as Up. This indicates the modem has authenticated. If the Up field hasn’t displayed after a few minutes perform a factory reset (Refer to manual) and complete this userguide again.
An important point after buying a device Linksys AM300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linksys AM300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linksys AM300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linksys AM300 you will learn all the available features of the product, as well as information on its operation. The information that you get Linksys AM300 will certainly help you make a decision on the purchase.
If you already are a holder of Linksys AM300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linksys AM300.
However, one of the most important roles played by the user manual is to help in solving problems with Linksys AM300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linksys AM300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
