Instruction/ maintenance manual of the product WS15Z-1 Linear
Go to page of 2
1 NO TE: This module must be “included in the Network” only where it will be permanentl y installed. The proper operation of this node in the mesh network is dependent on it knowing its location with respect to other nodes. Y ou cannot “test bench” confi gure this modul e.
2 AD V ANCED OPERA TION All On/All Off The WS15Z-1 suppor ts the ALL ON/ALL OFF commands. The WS15Z-1 can be set to respond to ALL ON and ALL OFF commands four diff erent ways . Refer to y our controller for inf ormation on how to set the WS15Z-1 to operate in the manner you desire .
An important point after buying a device Linear WS15Z-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linear WS15Z-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linear WS15Z-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linear WS15Z-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Linear WS15Z-1 will certainly help you make a decision on the purchase.
If you already are a holder of Linear WS15Z-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linear WS15Z-1.
However, one of the most important roles played by the user manual is to help in solving problems with Linear WS15Z-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linear WS15Z-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
