Instruction/ maintenance manual of the product Power Mac M5456 Apple
Go to page of 14
1 T echnical Information Main unit Power Macintosh 9600/200 processor A Po werPC ™ 604e processor with the follo wing features: m 200 megahertz (MHz) processor clock m bu ilt-in floating point unit .
2 m 8 kilobytes (KB) of non v olatile parameter memory m 512 KB of static RAM used as a le vel 2 cache. (The cache size is not upgradable because the RAM is soldered to the logic board.
Internal disk drives The follo wing dri ves come f actory-installed in your computer: m Apple SuperDri ve 1.4 MB high-density flopp y disk dri ve m Apple SCSI hard disk dri ve (“F ast” SCSI) m 12x-speed CD-R OM dri v e For more information about “F ast” SCSI, see “SCSI Interfaces” later in this booklet.
4 Interfaces m One ADB port supports up to three ADB input de vices (such as a ke yboard, mouse, and trackball) daisy-chained through a lo w-speed, synchronous serial bus m Optional monitor port supports color and grayscale monitors of v arious sizes and resolutions.
5 SCSI interfaces Y our computer has two SCSI interfaces: m an external standard SCSI chain m an internal “Fast” SCSI chain The external SCSI chain supports up to se v en external SCSI de vices. For information on connecting external SCSI de vices to your Macintosh, see your P ower Macintosh User’ s Manual.
6 All de vices on the same SCSI chain must hav e unique ID numbers, b ut de vices on dif ferent SCSI chains may use the same SCSI ID number . (For example, you could hav e a CD-R OM driv e with ID number 3 connected to the internal SCSI chain and a tape dri ve with ID number 3 connected to the external SCSI chain.
7 IMPORTANT Some older SCSI de vices may require updated dri vers. (A “dri v er” is special software that is installed in your System F older .) Contact the device manufacturer for information on obtaining dri v er software.
AC line input m Line voltage: 100–240 v olts (V) alternating current (A C), RMS single phase, automatically configured m Frequency: 50–60 Hz m Po wer: 560 watts (W) maximum continuous; 700 W peak input AC line output m Output receptacle: 100–120 V , 3 amperes (A) A C, 220–240 V , 1.
Power requirements for devices you can connect Apple Desktop Bus (ADB) m The mouse draws up to 10 milliamperes (mA). m The ke yboard draws 25–80 mA (v aries with k eyboard model used). m The maximum current av ailable for all ADB devices: 500 mA. Note: The ADB port can support up to three daisy-chained ADB de vices.
Expansion cards and other internal devices If you add an expansion card, a 5.25-inch storage de vice, or a 3.5-inch storage de vice to your computer , mak e sure the component’ s power requirements don’ t ex ceed the maximum power allo wances allocated to it by the computer .
Size and weight Weight Height Width Depth Main unit 15.9 kg* 439 mm 246 mm 440 mm 35 lb.* 17.3 in. 9.7 in. 17.3 in. Mouse 0.11 kg 33 mm 61 mm 107 mm 4 oz. 1.3 in. 2.4 in. 4.2 in. *Weight varies depending on type of hard disk and may be greater if optional devices are installed.
CD-ROM drive Disc speed m 12x (twelve-times speed) Disc diameters supported m 120 mm (4.7 inches) m 80 mm (3.2 inches) Data capacity m 656 MB, Mode 1 m 748 MB, Mode 2 Modes supported m Audio CD m CD-R.
Te chnic a l Infor m at ion Specifications for P ower Macintosh 9600 series computers.
034-0193-A Printed in U.S.A. © 1997 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, Apple SuperDrive, AppleVision, GeoPort, Macintosh, PlainTalk, and Power Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
An important point after buying a device Apple Power Mac M5456 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apple Power Mac M5456 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apple Power Mac M5456 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apple Power Mac M5456 you will learn all the available features of the product, as well as information on its operation. The information that you get Apple Power Mac M5456 will certainly help you make a decision on the purchase.
If you already are a holder of Apple Power Mac M5456, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apple Power Mac M5456.
However, one of the most important roles played by the user manual is to help in solving problems with Apple Power Mac M5456. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apple Power Mac M5456 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
