Instruction/ maintenance manual of the product PD300Z-2 Linear
Go to page of 2
1 PD300Z-2 Z-W av e Radio F requency (RF) Controlled, 300W , 120 V A C, NWI and Scene Capable , Plug-In Lamp Module, Series 300 NO TE: This module must be “included in the Network” only where it will be permanently installed. Y ou cannot “test bench: confi gure this module, then install.
2 Copyright © 2013 Linear LLC P1798 X1 Remote Control The PD300Z-2 will respond to Basic, Multile vel and Scene Activ ation commands that are par t of the Z-W ave system. Refer to your controller’ s instructions as to whether your controller can transmit those commands.
An important point after buying a device Linear PD300Z-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linear PD300Z-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linear PD300Z-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linear PD300Z-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Linear PD300Z-2 will certainly help you make a decision on the purchase.
If you already are a holder of Linear PD300Z-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linear PD300Z-2.
However, one of the most important roles played by the user manual is to help in solving problems with Linear PD300Z-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linear PD300Z-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
