Instruction/ maintenance manual of the product SP-1 ABC Office
Go to page of 13
USERS GUIDE Shoplifting Protection 24501 SP-1 KT7060 Ketec, Inc abcoffice www.abcoffice.com 1-800-658-8788.
SP-1 USERS GUIDE INDEX Parts List …………………………….1 Assembly Instructions……………… 2 Positioning the System ……………. 3 Tagging Guidelines …………………4 Removing Hard Tag……………….. 7 Detection Area …………………….
5’ RUBBER MOLDING & DOUBLE SIDED TAPE BASEPLATE SP-1 ANTENNA WITH WIRE POWER SUPPLY WITH 10’ OF CORD CAP NUTS AND WASHERS Remove all contents from packaging. Co mpare products with the example. If you are missing any parts please contact your supplier immediately.
1. Locate the baseplate, cap nuts and washers. 2. Place the antenna on top of the baseplate, aligning the holes in the antenna base with the studs on the baseplate. Make sure that the power supply wire is in the channels of the antenna base and is not crushed between the antenna base and the baseplate.
POSITIONING THE SYSTEM 6. Position the system a minimum of 18” (Inches) from the doorframe and on the side closest to the door handle. 7. Cut the rubber molding to the length that will allow it to cover the wire from the wall to the system.
1. The tag should be visible to the customer. 2. Tag uniformly, it speeds up removal. 3. Tag near a price label. It assists in the removal. 4. Place the tag as high as possible when tagging silks & light or stretchy fabrics. 5. Except for leather goods we d not recommend locating the tag at the seams.
TAGGING GUIDELINES Dresses Pants One Piece Bathing Suit Bikini Bathing Suit 5 1-800-658-8788 www.abcoffice.com abcoffice.
TAGGING GUIDELINES Shoes Tennis Shoes Belts Purses 6 1-800-658-8788 www.abcoffice.com abcoffice.
7 3. Remove the pin and hard tag from the detacher and store for future use. 2. Remove the pin by holding the hard tag to the detacher and pulling straight up on the pin or garment. 1. Place the hard tag into the detacher with the pin facing up. REMOVING HARD TAG 1-800-658-8788 www.
REMOVING HARD TAG It is possible for the locking mechanism to become jammed when the pin is pulled extremely hard. It is possible to un-jam the pin so that you will be able to remove it when needed. The first step is to place the hard tag into the detacher then press on the head of the pin.
3 Foot No Tag Zone 4-1/2 Foot No Tag Zone 4-1/2 Foot No Tag Zone The SP-1 system will detect hard tags within 4 feet to each side and 3 feet in front of and back of the antenna. We recomm end that you keep all merchandise with hard tags a minimum of 4-1/2 feet from t he sides of the system and 3 feet from the front of and back of the system.
ALARM HANDLING There are three reasons for the system to alarm: 1. The REAL alarm: The occurrence of a shoplifting attempt. 2. The ACCIDENTAL alarm: a) Personnel neglected to remove a tag at the point of sale.
TROUBLESHOOTING If a problem develops with the SP-1 system it is usually caused by common occurrences. The following is a basic troubleshooting guide to be used prior to contacting your supplier if the need arises. DO NOT MAKE ANY INTERNAL ADJUSTMENTS TO THE SYSTEM PRIOR TO CONTACTING YOUR SUPPLIER.
An important point after buying a device ABC Office SP-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ABC Office SP-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ABC Office SP-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ABC Office SP-1 you will learn all the available features of the product, as well as information on its operation. The information that you get ABC Office SP-1 will certainly help you make a decision on the purchase.
If you already are a holder of ABC Office SP-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ABC Office SP-1.
However, one of the most important roles played by the user manual is to help in solving problems with ABC Office SP-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ABC Office SP-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
