Instruction/ maintenance manual of the product IS:26600 Lightolier
Go to page of 4
IS:26600 READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING TRACK This fixture is intended for installation in accordance with the National Electrical Code and local or Federal code specifications. To assure full compliance with codes and regulations, check with your local electrical inspector before installation.
IS:26600 INSTRUCTION SHEET NO. A0397 Page 2 of 4 Recessed ProSpec ™ Track Mounting Methods FIG. A FIG. B FIG. C FIG. D MOUNTING PROSPEC ™ TRACK There are three methods of mounting the track to a surface (Fig A, B & C). 1. Direct mounting (Fig A): • Mark centerline for track location.
IS:26600 INSTRUCTION SHEET NO. Instructions for Recessed ProSpec ™ Track Power Feed to Track DIRECT POWER FEED TO "FEED" TRACK Use solid 12 ga. copper wire when feeding the track. The feed track accepts two separate 120 V, 60 Hz branch circuits.
FIELD CUTTING TRACK • Remove and save the Dead End Cover. • Cut the track using a metal cutting blade (preferably in a miter box to obtain a square cut) • Remove ALL burrs and sharp edges from the cut surface of the track being careful not to destroy the integrity of the track geometry.
An important point after buying a device Lightolier IS:26600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lightolier IS:26600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lightolier IS:26600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lightolier IS:26600 you will learn all the available features of the product, as well as information on its operation. The information that you get Lightolier IS:26600 will certainly help you make a decision on the purchase.
If you already are a holder of Lightolier IS:26600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lightolier IS:26600.
However, one of the most important roles played by the user manual is to help in solving problems with Lightolier IS:26600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lightolier IS:26600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
