Instruction/ maintenance manual of the product CA3FMR Lightolier
Go to page of 2
U.S. AND FOREIGN PATENTS PENDIN G PLASTER SHIELD PLASTER/JOINT COMPOUND NOTE: Photos shown here assume the Frame-In Kit and ceiling are already installed. For flangeless installations, cardboard PAINT OVERSPRAY SHIELD, which is installed in 3” Evolution Frame-In-Kits, must be removed prior to CA3FMR installation.
U.S. AND FOREIGN PATENTS PENDIN G CEILING APPEARANCE AFTER PLASTER / COMPOUND HAS BEEN APPLIED AND FLANGELESS TRIM RING PLASTER SHIELD HAS BEEN REMOVED. Fig. 4 FLANGELESS TRIM RING LIP Fig. 3 PLASTER / COMPOUND PLASTER / COMPOUND APPLICATION TOOL PLASTER SHIELD 4.
An important point after buying a device Lightolier CA3FMR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lightolier CA3FMR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lightolier CA3FMR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lightolier CA3FMR you will learn all the available features of the product, as well as information on its operation. The information that you get Lightolier CA3FMR will certainly help you make a decision on the purchase.
If you already are a holder of Lightolier CA3FMR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lightolier CA3FMR.
However, one of the most important roles played by the user manual is to help in solving problems with Lightolier CA3FMR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lightolier CA3FMR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
