Instruction/ maintenance manual of the product 1004ICVN Lightolier
Go to page of 4
IN S TR U C TI O N S H E ET N O . IS :1004ICV B1204 P ag e 1 of 4 INST ALLA TION PROCEDURE FOR LOW VOL T AGE INSULA TED CEILING FRAME-IN-KIT 1004ICV , 1004ICVN 1. FRAME-IN (Fig. A) Locate fixture along joist and line up bottom edge of HINGED MOUNTING BAR with the bottom of joist and fasten in place.
READ AND UNDERST AND THESE INSTRUCTIONS BEFORE INST ALLING FIXTURE This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation.
IN S TR U C TI O N S H E ET N O . IS :1004ICV B1204 P ag e 3 of 4 READ AND UNDERST AND THESE INSTRUCTIONS BEFORE INST ALLING FIXTURE This fixture is intended for installation in accordance with the National Electrical Code and local regulations.
9. TRANSFORMER REPLACEMENT (Fig. K) 1. Make sure power is off. 2. Remove REFLECTOR TRIM from ceiling. 3. Remove SCREW and lift TRANSFORMER off bracket. 4. Remove J-BOX COVER by removing wing nut. 5. Unsplice primary leads in J-BOX. 6. Remove primary leads from J-BOX cover and clip attached to side of housing.
An important point after buying a device Lightolier 1004ICVN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lightolier 1004ICVN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lightolier 1004ICVN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lightolier 1004ICVN you will learn all the available features of the product, as well as information on its operation. The information that you get Lightolier 1004ICVN will certainly help you make a decision on the purchase.
If you already are a holder of Lightolier 1004ICVN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lightolier 1004ICVN.
However, one of the most important roles played by the user manual is to help in solving problems with Lightolier 1004ICVN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lightolier 1004ICVN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
