Instruction/ maintenance manual of the product X9I Life Fitness
Go to page of 8
X9i Cross- Trainer ASSEMBL Y INSTRUCTIONS.
Congratulations... and welcome to the world of Life Fitness and the Life Fitness X9i Cross-T rainers The following Parts List and the step by step assembly procedures have been assembled to make the set-up of the Cross-T rainer as quick and easy as possible.
I MPOR T ANT S AFETY I NSTRUCTIONS ! ⇒ DO NOT locate the Cross-T rainer outdoors, near swimming pools, or in areas of high humidity . ⇒ DO NOT operate your Cross-T rainer if it has been dropped, damaged, or even partially immersed in water . If this occurs, contact Life Fitness Customer Support Services at the number in the Operation Manual.
1 Hex socket Head Cap Screw Qty: 8 2 Phillip s Pan Head Screw Qty: 8 3/8-16 x 1” #8-18 x 10” 0017-00101-1645 0017-00101-1744 3 Phillip s Pan Head Screw Qty: 14 4 Console Assembly Qty: 1 #8-18 x 3/.
Step 1 Before proceeding, familiarize yourself with the part s of the Cross-T rainer and make sure that you have received all the items described in the Parts List. Step 2 Locate the left and right FRONT COVER (#9, #10). Usign two PHILLIPS P AN HEAD SCREWS (#3), mount the USER LEFT FRONT COVER (#9) to the FRAME (A).
Step 4 Detach and unwrap the WIRE HARNESS (E) (10P , 3P , 4P) located at the top of the MONOCOLMN (F). Holding the CONSOLE SUPPORT ASSEMBL Y (#7) with the handgrip s facing upward, feed the WIRE HARNESS up through the neck and out the top access hole.
Step 10 Locate the POLAR RECEIVER (#16). Slide the FOAM ISOLA TOR (#15) over the POLAR RECEIVER. Remove the POLAR RECEIVER JACK (G) from the tape and plug the POLAR RECEIVER into the POLAR RECEIVER JACK. Step 1 1 Locate the front and back MONOCOLUMN COVERS (#5 & #6).
Before attempting to operate your Cross-T rainer , it is imperative that you familiarize yourself with the contents of the operation Manual. If your Cross-T rainer does not respond as described in the Operation Manual, contact the nearest Life Fitness service center as listed in the Operation Manual.
An important point after buying a device Life Fitness X9I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness X9I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness X9I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness X9I you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness X9I will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness X9I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness X9I.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness X9I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness X9I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
