Instruction/ maintenance manual of the product X1 Life Fitness
Go to page of 2
© 2005 Life Fitness , a division of Brunswick Corporation. All rights reser ved. Life F itness is a registered trademarks of Brunswick Corporation. Any use of this trademark , without the express written consent of Life Fitness is forbidden.
T ools required: Metric Socket set, Phillips Screwdriver , Metric Wrench set 1. 2. 3. 4. Position the base unit near the desired location for use (Refer to the "Getting Started" section of the User Manual for proper location). Locate and install the four LEVELER FEET (A) into the front and rear stabilizers as shown.
An important point after buying a device Life Fitness X1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness X1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness X1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness X1 you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness X1 will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness X1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness X1.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness X1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness X1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
