Instruction/ maintenance manual of the product SU50 Life Fitness
Go to page of 7
M051-K50-A104 1 SEA TED ROW SU50 A SSEMBLY INSTRUCTIONS The Seated Row SU50 com es disass embled in two pieces. F ollow the steps below to assem ble it.
Seated Row SU50 Custom er Assembly Instructions 2 Figure 1. Seated Row SU50. 1. Bolt holes on Seat Subfram e 2. Bolt holes on W eight Stack Subfram e 3. Cable Pulley s 4. Cable 012345 6 ½½½½½½ Figure 2. Configur a tion for bolts, end caps, washers and nuts .
Seated Row SU50 Custom er Assembly Instructions 3 INCLUDED PA RTS Included parts are: 1. 3-3/4” Hex head bolts (4) 2. End caps (bolt c overs) (8) 3. Flat washer (used to “ shorten” bolt so end cap will f it on the nut) (4) 4. End cap washers ( end caps snap onto them ) (8) 5.
Seated Row SU50 Custom er Assembly Instructions 4 Figure 4. Bolt ( viewed f rom the Seat Subf rame section). 3. Tigh ten the nut s. Moving to the W eight Stack Subfram e side of the SU50, place end cap washers and nuts onto the f our bolt ends. Tighten the nuts so that they are c ompletely over the threads of the bolt (upper bolt in Figure 5).
Seated Row SU50 Custom er Assembly Instructions 5 INSTA LLLING THE CA BLE 1. Remove the p ulleys. O nce the W eight Stack Subfram e is bolted to the Seat Subf rame section, you will need to remove the upper and lower pulleys to insert the cable. Us ing two 9/16” sock et or box wrenches , remove the pulley bolts as shown in Figure 6.
Seated Row SU50 Custom er Assembly Instructions 6 2. Bolt the cab le to the weig ht stack. Thread the 7/8” nut up on the cable bolt as shown in Figure 7. Screw the bolt down into the weight stack as shown in Figure 8. Tighten the bolt with a crescent wrench or 7/8” open-end wrench.
Seated Row SU50 Custom er Assembly Instructions 7 Figure 9. Cable insta lla tion. 4. Reinser t the pulleys into the pulley housings and tighten the bolts. Replace the bolts, end cap washers , and end caps using the conf iguration shown in Figure 10. Figure 10.
An important point after buying a device Life Fitness SU50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness SU50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness SU50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness SU50 you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness SU50 will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness SU50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness SU50.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness SU50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness SU50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
