Instruction/ maintenance manual of the product Squat Life Fitness
Go to page of 8
Squat Assembly Instructions.
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Qty 1 1 4 46 15 1 4 1 11 1 2 1 1 2 2 1 1 1 1 6 Tools Required: O 17mm W rench O Metric Allen W rench Set O Ratchet with 17mm Sock et O Rubber Ma.
.
Squat Assembly Instructions 1. LOOSELY assemble the PLATFORM FRAME (1) to the TOWER (2) using four M10 X 130mm BOLTS (3), eight 3/8" SAE WASHERS (4) and four M10 NYLOCK NUTS (5) as shown.
7. Assemble the OUTPUT CAM (17), OUTPUT PLATE (18), and OUTPUT RING (19) using three M10 X 45mm BOLTS (20) and three 3/8" SAE WASHERS (4) as shown. Tighten the BOLTS securely. 8. Assemble the REAR SHROUD (21) and FRONT SHROUD (22) to the TOWER (2) using four M10 X 20mm BOLTS (23), four 3/8" SAE WASH- ERS (4) as shown.
NOTE: Some components have been removed from the illustration for clarity. 11. Assemble one M10 HEX JAM NUT (27) onto one end of the CABLE (28) approximately 1/2”. Assemble the ROD END BEARING (29) to the same end of the CABLE until it meets the M10 HEX JAM NUT.
16. Attach the PLATFORM (35) to the PLATFORM FRAME (1) using four M10 X 25mm BOLTS (9) and four 3/8" SAE WASHERS (4) as shown. Tighten the BOLT securely.
© 2006 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a registered trademark of Brunswick Corporation. TCSL 6.
An important point after buying a device Life Fitness Squat (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness Squat yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness Squat - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness Squat you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness Squat will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness Squat, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness Squat.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness Squat. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness Squat along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
