Instruction/ maintenance manual of the product Lat Pulldown Life Fitness
Go to page of 8
Lat Pulldown Assembly Instructions.
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Qty 1 1 1 4 44 15 1 6 1 2 1 6 1 1 2 2 2 1 5 1 1 1 6 Tools Required: O 17mm W rench O Rubber Mallet O Metric Allen W rench Set O Ratchet.
.
Lat Pulldown Assembly Instructions 1. LOOSELY assemble the FRONT BRACE (1) and REAR BRACE (2) to the TOWER (3) using four M10 X 130mm BOLTS (4), eight 3/8" SAE WASH- ERS (5) and four M10 NYLOCK NUTS (6) as shown.
8. Assemble the OUTPUT CAM (20), OUTPUT PLATE (21), and OUTPUT RING (22) using three M10 X 45mm BOLTS (23) and three 3/8" SAE WASHERS (5) as shown. Tighten the BOLTS securely. 9. Assemble the REAR SHROUD (24) and FRONT SHROUD (25) to the TOWER (3) using four M10 X 20mm BOLTS (26), four 3/8" SAE WASH- ERS (5) as shown.
12. Slide one SHAFT COLLAR (30) over each shaft of the ROLLER PAD BRACKET (11). 13. Attach the ROLLER PADS (31) to the ROLLER PAD BRACKET (11) using two M10 X 35mm BOLTS (19) and two PLATES (27) as shown.
NOTE: Some components have been removed from the illustration for clarity. 17. Assemble one M10 HEX JAM NUT (35) onto one end of the CABLE (36) approximately 1/2”. Assemble the ROD END BEARING (37) to the same end of the CABLE until it meets the M10 HEX JAM NUT.
© 2006 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a registered trademark of Brunswick Corporation. TCPD 7.
An important point after buying a device Life Fitness Lat Pulldown (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness Lat Pulldown yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness Lat Pulldown - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness Lat Pulldown you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness Lat Pulldown will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness Lat Pulldown, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness Lat Pulldown.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness Lat Pulldown. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness Lat Pulldown along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
