Instruction/ maintenance manual of the product Heavy Duty Multi Rack Life Fitness
Go to page of 16
HEA VY DUTY MUL TI RACK (HDMR) W ARNING: Read and follow all directions for each step to insure proper assembly of this product. CLASS SB (S tudio): Professional and / or commercial use (Commercial Us.
2 HAMMER STRENGTH HEA VY DUTY RACKS SAFETY & W ARRANTY Purchasers of Hammer S trength products should read the Owner's Manual and all of the warning labels on the product s before using them.
3 5,135,449 ; D321,391; 5,100,080 ; 5,171,198 ; 5,273,505 ; 5,181,896 ; D321,027; 5,066,00 3; D321,389; 5,135,45 6; D321,387; 5,125,88 1; 6,203,474B1 5,044,63 1; D321,026; 5,006,00 4; D321,390; 5,180,35 4; 5,273,50 4; 5,050,87 3; This exercise machine is covered by one or more of the following U.
4 LIMITED W ARRANTY WHA T IS COVERED This Hammer S trength commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the origina.
5 LIMITED W ARRANTY EXCLUSIVE W ARRANTY THIS LIMITED W ARRANTY IS IN LIEU OF ALL OTHER W ARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED T O THE IMPLIED W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE, AND ALL OTHER OBLIGA TIONS OR LIABILITIES ON OUR P ART .
6 COMPONENTS LIST * ITEM NO. QTY . P ART NO. DESCRIPTION 1 1 HDMR8-CFUPL-0 FRONT LEFT UPRIGHT 2 1 HDMR8-LSFL-0 LOWER LEFT BASE 3 42 HHB.5X4.5 1/2 X 4-1/2” BOL T 4 54 H-BACK-W ASH BACKING DOME W ASHER 5 44 WASH.5ST AR 1/2" INTERNAL LOCK W ASHER 6 44 NUT .
7 HARDW ARE: 20 3 16 5 6 17 4 18 ½ X 3-1/2” Bolt ½ X 4-1/2” Bolt 3/8 X 4-1/2” Bolt ½” Internal Lock W asher 3/8” Flat W asher Backing Dome W asher 3/8” Lock Nut Backing Dome W asher ½.
8 STEP 1: LOOSEL Y assemble the FRONT LEFT UPRIGHT (1) to the LOWER LEFT BASE (2) using two 1/2 X 4-1/2” BOL TS (3), two BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5) and two 1/2” LOCK NUTS (6).
9 STEP 2: LOOSEL Y assemble the REAR CROSS BRACE (9) to the bottom of the LOWER LEFT BASE (2) and LOWER RIGHT BASE (8) using four 1/2 X 4-1/2” BOL TS (3), four BACKING DOME WASHERS (4), four 1/2” INT T OOTH LOCK W ASHERS (5) and four 1/2” LOCK NUTS (6).
10 STEP 3: LOOSEL Y assemble the SHORT LEFT UPRIGHT (1 1) to the LOWER LEFT BASE (2) using two 1/2 X 4-1/2” BOL TS (3), two BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5), and two 1/2” LOCK NUTS (6).
11 1 4 3 3 5 6 6 5 13 4 11 12 7 STEP 4: LOOSEL Y assemble the two MUL TI RACK FRONT SUPPORTS (13) to the FRONT LEFT & RIGHT UPRIGHTS (1 & 7) and the SHORT LEFT & SHOR T RIGHT UPRIGHTS .
12 14 1 3 4 5 6 6 5 4 3 7 8 2 STEP 4: LOOSEL Y assemble the two REAR UPRIGHTS (14) to the LOWER LEFT & RIGHT BASES (2 & 8) and FRONT LEFT & RIGHT UPRIGHTS (1 & 7) using eight 1/2 x 4-1/2” BOL TS (3), eight 1/2” BACKING DOME W ASHERS (4), eight 1/2” INT LOCK W ASHERS (5), and eight 1/2” LOCK NUTS (6).
13 STEP 5: SECUREL Y assemble the bottom of the ten WEIGHT HORNS (15) to the REAR UPRIGHTS (14) using ten 3/8 x 4- 1/2” BOL TS (16), ten BACKING DOME W ASHERS (4), twenty 3/8” FLA T WASHERS (17), and ten 3/8” LOCK NUTS (18).
14 STEP 6: Assemble the SHORT BENCH LOCK (19) to the REAR CROSS BRACE (9) using two 1/2 X 3-1/2” BOL TS (20), two BACKING DOME W ASHERS (4), two 1/2” INT LOCK W ASHERS (5), and two 1/2” LOCK NUTS (6). Insert the LEFT BAR SUPPORT (21) into the desired slots of the FRONT LEFT UPRIGHT (1), and allow it to drop down to lock in place.
15 STEP 7: S potter Platform accessories are available for the HDMR8. Assemble each S potter Platform (A) to the FRONT LEFT & RIGHT UPRIGHTS (1 & 7) using two BOL TS (B), two DOME W ASHERS (C), two SP ACERS (D), one WEAR PLA TE (E), two FLA T W ASHERS (F), and two NUTS (G) as shown in the illustration.
16 Clean: • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up p aint can be purchased from your Hammer Strength customer service represent ative. Inspect: • Hardware should be checked for looseness. T ighten as required.
An important point after buying a device Life Fitness Heavy Duty Multi Rack (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness Heavy Duty Multi Rack yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness Heavy Duty Multi Rack - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness Heavy Duty Multi Rack you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness Heavy Duty Multi Rack will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness Heavy Duty Multi Rack, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness Heavy Duty Multi Rack.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness Heavy Duty Multi Rack. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness Heavy Duty Multi Rack along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
