Instruction/ maintenance manual of the product HDCR Life Fitness
Go to page of 16
HEA VY DUTY COMBO RACK (HDCR) W ARNING: Read and follow all directions for each step to insure proper assembly of this product. CLASS SB (S tudio): Professional and / or commercial use (Commercial Use.
2 HAMMER STRENGTH HEA VY DUTY RACKS SAFETY & W ARRANTY Purchasers of Hammer S trength products should read the Owner's Manual and all of the warning labels on the product s before using them.
3 W ARNING SERIOUS INJUR Y CAN OCCUR ON THIS EQUIPMENT . YOU MUST FOLLOW THESE PRECAUTIONS TO A VOID INJUR Y! 1. Before using, read all the warnings and obtain instruction on the use of this machine. Use only for intended exercise. DO NOT modify the equipment.
4 LIMITED W ARRANTY WHA T IS COVERED This Hammer S trength commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the origina.
5 LIMITED W ARRANTY HOW TO GET P ARTS & SERVICE Simply call Customer Support Services at (800) 351-3737, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central S tandard Time, and tell them your name, address and the serial number of your Product.
6 1 . Frame Construction: Frame is constructed of mechanical quality steel purchased in mill run quantities. Frame is pri- marily 3" x 3" square shaped tubing and 3” x 2” shaped tubing with 7 gauge and 1 1 gauge wall thickness. 2. Frame Finish: The frames are coated with an electrostatic epoxy powder coat finish.
7 COMPONENTS LIST * ITEM NO. QTY . P ART NO. DESCRIPTION 1 2 HDCR8-CFUPR-0 FRONT RIGHT UPRIGHT 2 2 HDCR8-CFUPL-0 FRONT LEFT UPRIGHT 3 2 HDCR8-LSF-0 BASE 4 56 HHB.5X4.5 1/2 X 4-1/2” BOL T 5 70 H-BACK-W ASH BACKING DOME W ASHER 6 66 WASH.5ST AR 1/2” INTERNAL LOCK W ASHER 7 58 NUT .
8 HARDW ARE: 17 4 13 6 7 14 5 15 ½ X 3-1/2” Bolt ½ X 4-1/2” Bolt 3/8 X 4-1/2” Bolt ½” Internal Lock W asher 3/8” Flat W asher Backing Dome W asher 3/8” Lock Nut Backing Dome W asher ½.
9 STEP 1: Loosely assemble the two FRONT RIGHT UPRIGHTS (1) and the two FRONT LEFT UPRIGHTS (2) to the two BASES (3) using eight 1/2 x 4-1/2” BOL TS (4), eight BACKING DOME WASHERS (5), eight 1/2” INT LOCK W ASH- ERS (6) and eight 1/2” LOCK NUTS (7).
10 STEP 2: LOOSEL Y assemble the two CROSS SUPPORTS (8) and two PULL-UP SUPPORTS (9) to the top of the FRONT RIGHT & LEFT UPRIGHTS (1 & 2) using eight 1/2 X 4-1/2” BOL TS (4), sixteen 1/2” INT TOOTH LOCK W ASHERS (6) and eight 1/2” LOCK NUTS (7).
11 STEP 3: Assemble the bottom of the four REAR UPRIGHTS (1 1) to the bottom of the BASES (3) using eight 1/2 X 4-1/2” BOL TS (4), eight BACKING DOME WASHERS (5), eight 1/2” INT T OOTH LOCK WASHERS (6) and eight 1/2” LOCK NUTS (7).
12 STEP 4: SECUREL Y assemble the bottom of the ten WEIGHT HORNS (12) to the REAR UPRIGHTS (1 1) using twenty 3/8 x 4-1/2” BOL TS (13), twenty BACKING DOME W ASHERS (5), forty 3/8” FLA T WASHERS (14), and twenty 3/8” LOCK NUTS (15).
13 STEP 6: Assemble the the LONG BENCH LOCK (16) to the LOWER CROSS BRACE (10) using two 1/2 X 3-1/2” BOL TS (17), two BACKING DOME W ASHERS (5), two 1/2” INT LOCK W ASHERS (6), and two 1/2” LOCK NUTS (7).
14 STEP 7: Insert the two LEFT BAR CA TCHES (18) and the two LEFT BAR SUPPORTS (19) into the desired slot s of the two FRONT LEFT UPRIGHTS (2). Insert the two RIGHT BAR CA TCHES (20) and the two RIGHT BAR SUPPORTS (21) into the desired slot s of the two FRONT RIGHT UPRIGHTS (1).
15 STEP 8: S potter Platform accessories are available for the HDCR8. Assemble each S potter Platform (C) to the FRONT RIGHT & LEFT UPRIGHTS (1 & 2) using two BOL TS (D), two DOME W ASHERS (E), two SP ACERS (F), one WEAR PLA TE (G), two FLA T W ASHERS (H), and two NUTS (I) as shown in the illustration.
16 Clean: • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up p aint can be purchased from your Hammer Strength customer service represent ative. Inspect: • Hardware should be checked for looseness. T ighten as required.
An important point after buying a device Life Fitness HDCR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness HDCR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness HDCR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness HDCR you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness HDCR will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness HDCR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness HDCR.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness HDCR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness HDCR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
