Instruction/ maintenance manual of the product CSLAT Life Fitness
Go to page of 14
CLUB SERIES LAT PULLDOWN Part # 6941801 Rev A. Revision:08/02/00 1 ASSEMBLY INSTRUCTIONS.
PARTS LIST KE Y PART # DESCRIPTION QT Y KE Y PART # DESCRIPTION QT Y 1 69046xx ASSY TOWER 1 9 3102922 3/8 X 2-3/4” BOLT 8 1A 69 2 0001 CABLE 1 10 3102905 3/8 X 3-3/4” BOLT 4 1B 6714901 GUIDE ROD B.
STEP 1: FIGURE 1 4 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • LOOSEL Y assemble the T OWER (1) to the BENCH FRAME (3) using four RH CAPS (27), two 3/8 X 3-3/4” BOL TS (10), four 3/8” RH W ASHERS (14) and two 3/8” LOW HEIGHT LOCK NUTS (1 1) as shown in FIGURE 1.
1A 2 2N 2A 2M 2D 2E 2L 2K 2C 2I 2G 2J 2F 2H 2B 1A.
5 FIGURE 2 STEP 2: • LOOSEL Y assemble the MAIN UPRIGHT (2) to the base of the BENCH FRAME (3) using four RH CAPS (27), two 3/8 X 3-3/ 4” BOL TS (10), four 3/8” RH W ASHERS (14) and two 3/8” LOW HEIGHT LOCK NUTS (11) as shown in FIGURE 2.
6 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 3 STEP 3: • SECUREL Y assemble the KNEE SUPPOR T (5) to the BENCH FRAME (3) using two BLACK RH CAPS (17), two RH CAPS (27), two 3/8 X 2-3/4” BOL TS (9), four 3/8” SAE W ASHERS (13), four 3/8” RH W ASHERS (14) and two 3/8” LOW HEIGHT LOCK NUTS (1 1) as shown in FIGURE 3.
7 STEP 4 FIGURE 4 • SECUREL Y assemble the SEA T P AD (18) to the BENCH FRAME (3) using two RH CAPS (27), two 3/8 X 2-3/4” BOL TS (9) and two 3/8” RH W ASHERS (14) as shown in FIGURE 4.
8 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 5: FIGURE 5 • Insert the two GUIDE RODS (26) (found in the SHROUD KIT) into the base of the TOWER (1) as shown in FIGURE 5. Lubricate the GUIDE RODS (26) with a slicon or teflon spray that is available at most hardware stores.
9 • Screw the treaded end of the CABLE all way into the end of the shaft on the HEAD PLA TE (8) and tighten jam nut securely . See FIGURE 6. STEP 6: FIGURE 6 • SECUREL Y assemble the GUIDE ROD SUP.
0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 10 ST````` FIGURE 7 • Peel the backing off the WEIGHT ST ACK LABELS (12), line up sheet to the right of the selector opening and apply labels to the WEIGHT PLA TES (24), starting with the HEAD PLA TE (8) as shown in FIGURE 7.
11 FIGURE 8 • Assemble the PLACARD LABEL (22) or the FOREIGN LANGUAGE PLACARD LABEL (23) to the FRONT SHROUD as shown in FIGURE 8. STEP 8: 23 22 7 21 4 • Attach LA T BAR (4) and/or TRICEP ROPE (7) end of cable using on SNAP LINK (21) with the TRICEP ROPE (7) as shown in FIGURE 8.
11 STEP 8: FIGURE 8 (NOTE: If the PARTIAL SHROUD KIT is being used follow STEP 8. If the FULL SHROUD KIT is being used follow STEP 9.) 28 3/8 X 3-1/2” 27S 1 12 • SECURELY assemble the FRONT PARTIA.
12 STEP 9: FIGURE 9 • SECURELY assemble the FRONT FULL SHROUD (31) and the REAR FULL SHROUD (32) to the TOWER (1) using ten 3/8 X 3-1/2” BUTTON HEAD BOLTS (28), ten STARLOCK WASHERS (27), and ten 3/8” ACORN NUTS (12) as shown in FIGURE 9.
Clean: • Upholstery with mild soap and water . • Guide rods with a cotton cloth. • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up paint can be purchased from your LifeFitness customer service representative at (800)328-9714.
An important point after buying a device Life Fitness CSLAT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness CSLAT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness CSLAT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness CSLAT you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness CSLAT will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness CSLAT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness CSLAT.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness CSLAT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness CSLAT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
