Instruction/ maintenance manual of the product Club Machine Life Fitness
Go to page of 10
CLUB SERIES SMITH MACHINE Part # 7187601 Rev . B Revision:12/4/01 1 ASSEMBL Y INSTRUCTIONS.
P AR TS LIST PA R T # 71851 xx 7 1 124 xx 7 1 125 xx 71852 01 718 2702 3203002 71850 01 71781 01 7 1 126 01 71046 01 KEY 1 2 3 4 5 6 7 8 9 10 QTY 1 1 1 2 2 2 1 2 6 2 KEY 11 12 13 14 15 16 17 18 19 OR .
3 12 3/8 X 3” BOL T 1 1 3/8 X 2-3/4” BOL T 13 3/8” LOW HEIGHT LOCK NUT 14 3/8” SAE W ASHER 18 RH CAP (BLACK/WHITE/PLA TINUM) 15 RH W ASHER 19.
4 FIGURE 1 STEP 1: • LOOSEL Y assemble the two WEIGHT HORNS (9) and the BOTT OM CROSS BRACE (3) to the RIGHT and LEFT UPRIGHTS (1 & 16) as shown in FIGURE 1 using using four BLACK RH CAPS (18), .
5 FIGURE 2 STEP 2: 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECUREL Y assemble the four WEIGHT HORNS (9) to the RIGHT and LEFT UPRIGHTS (1 & 16) as shown in FIGURE 2 using using eight BLACK RH CAP.
6 STEP 3: FIGURE 3 • Insert the shaft of the HOUSINGS (4) into the ends of the SMITH BAR (7) as shown in FIGURE 3. 7 4 !! IMPOR T ANT !! REMOVE T APE FROM BOTH ENDS OF THE HOUSINGS AS SHOWN! DO NOT .
7 STEP 4: FIGURE 4 • Slide one GUIDE ROD (10) through the upper hole in the UPRIGHT (1 & 16) and proceed to slide one 1” SHAFT COLLAR (6) over the bottom of the GUIDE ROD (10) as shown in FIGURE 4. • Hook the SMITH BAR (7) onto slots of the BAR SUPPOR T RACKS (8).
8 STEP 5: FIGURE 5 • Slide the 1” SHAFT COLLARS (6) up the GUIDE RODS (10) to the bushing of the UPRIGHTS (1 & 16) and SECUREL Y TIGHTEN. SECUREL Y TIGHTEN! 10 6 1 16.
9 FIGURE 6 STEP 6: • If necessary , apply the FOREIGN LANGUAGE PLACARD LABEL (17) to the PLACARD LABEL on the RIGHT UPRIGHT (1) as shown in FIGURE 6.
Clean: • Upholstery with mild soap and water . • Guide rods with a cotton cloth. • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up paint can be purchased from your LifeFitness customer service representative at (800)351-3737.
An important point after buying a device Life Fitness Club Machine (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness Club Machine yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness Club Machine - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness Club Machine you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness Club Machine will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness Club Machine, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness Club Machine.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness Club Machine. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness Club Machine along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
