Instruction/ maintenance manual of the product 95TI Life Fitness
Go to page of 8
97Ti, 95Ti, 93T Treadmills Assembly Instructions.
Congratulations... and welcome to the world of The following Parts Identification Listing and the step by step assembly procedures have been assembled to make the set-up of this treadmill as quick and easy as possible.
I MPORTANT S AFETY I NSTRUCTIONS ! DO NOT position the rear of the treadmill within 6 feet ( 2 meters ) of the nearest obstruction. The sides of the treadmill should maintain a m inimum clearance of 8 inches ( 20 cm ) from the nearest treadmill or other obstruction.
T OOLS R EQUIRED FOR A SSEMBLY... Phillips screwdriver, Torx wrench, 3/4” combination wrench, flat blade screwdriver (or 5/16” nut driver) P ARTS D ESCRIPTION 1 LEFT UPRIGHT Qty: 1 2 RIGHT UPRIGHT.
IMPORTANT! DO NOT DISCARD THE SHIP KIT LOCATED ON TOP OF THE DECK AND BELT. ALL NECESSARY COMPONENTS NEEDED TO COMPLETE TH E INSTALLATION ARE LOCAT ED IN THE SHIP KIT. IMPORTANT! NE JETEZ PAS LE KIT D’EXPÉDITION PLACÉ SUR LE DESSUS DU PLATEAU ET SUR LE TAPIS.
10. Position the right end of the ERGO FRONT CROSSBAR (#4) near the large access hole on the inside of the RIGHT UPRIGHT HANDLEBAR BRACKET (L). Align the ERGO FRONT CROSSBAR MOUNTING HOLES w ith those in the RIGHT UPRIGHT HANDLEBAR BRACKET and secure using two BOLTS (#19), from the inside of the treadmill, and NUTS (#22).
16. Locate the LEFT ACCESSORY TRAY (#11). Carefully slide the tray into the top of the LEFT UPRIGHT (#1) as shown until fully seated. Secure the accessory tray to the LEFT TOP MOUNTING PLATE (H) using four screws (#21). Repeat the procedure for the RIGHT ACCESSORY TRAY (#12) and RIGHT TOP MOUNTING PLATE (J).
PRE-OPERATION CHECKLIST ⇒ Ensure that all fasteners are tight. ⇒ Make sure the STRIDING BELT is properly tens ioned and aligned according to the Operation Manual. ⇒ Check the operation of the STOP switch and tether switch assembly. (See Operation Manual.
An important point after buying a device Life Fitness 95TI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 95TI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 95TI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 95TI you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 95TI will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 95TI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 95TI.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 95TI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 95TI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
