Instruction/ maintenance manual of the product 90S Life Fitness
Go to page of 29
LCD Entertainment Ready Inst alla tion Instructions.
.
C ORPORA TE H EADQUARTERS 10601 West Belmont Avenue Franklin Park, Illinois 60131 • U.S.A. 847.288.3300 • F AX: 847.288.3703 800.735.3867 (T oll-free within U.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digit al device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation.
T ABLE OF C ONTENTS 3 Section Description Page 1. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 2. Installation . . . . . . . . . . . . . . . . . . . . . . . . .
• DANGER: T o reduce the risk of electrical shock, always unplug this Life Fitness product before cleaning or attempting any maintenance activity . • W ARNING: T o reduce the risk of burns, fire, electric shock, or injury , it is imperative to connect each prod- uct to a properly grounded electrical outlet.
• DANGER: Pour réduire les risques de décharge électrique, toujours débrancher cet appareil Life Fitness avant le nettoyage ou toute mesure d'entretien.
Note to the CA TV Inst aller: This reminder is provided to call the CA TV system installer ’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular , specifies that the cable ground shall be connected to the ground- ing system of the building as close to the point of cable entry as practical.
M ODELS N EW 95T I T READMILLS T OOLS R EQUIRED : Phillips Screwdriver , Metric Allen Set, M16 & M17 Wrench P ARTS N OT U SED F ROM K IT : (1) Main Bracket Cap, (1) Grommet 1. T urn off the treadmill and unplug it from the power outlet. 2. Remove the six SCREWS securing the MOTOR COVER.
19. With the remaining TV BRACKET (15) oriented as shown, install it to the back of the TV (16) using four SCREWS (17) and WASHERS (6). T ighten the SCREWS securely . (8-10 ft. lbs.) NOTE: Be sure the side holes of the TV BRACKET are oriented as shown.
M ODELS N EW 95X C ROSS -T RAINERS T OOLS R EQUIRED : Phillips Screwdriver , Metric Allen Set, M16 & M17 Wrench P ARTS N OT U SED F ROM K IT : (1) Main Bracket Cap, (1) Grommet 1. Remove the protective liner from one of the provided F ASTENER STRIPS.
9. T ilt the DISPLA Y CONSOLE (--) forward and connect the I-R CONTROL (A) and S-VIDEO (--) CABLES to the back of the DIS- PLA Y CONSOLE. 10. T ape the ends of the all CABLES (POWER, COAXIAL, I-R CONTROL, S-VIDEO) together . 1 1. Feed the taped end of the MEDIA CABLES (--) through the large hole in the back of the CONSOLE BRACKET (--).
M ODELS N EW 95C U PRIGHT L IFECYCLE ® E XERCISE B IKES T OOLS R EQUIRED : Phillips Screwdriver , Metric Allen Set, M16 & M17 Wrench P ARTS N OT U SED F ROM K IT : (1) Main Bracket Cap, (1) Grommet 1. Remove the protective liner from one of the provided F ASTENER STRIPS.
9. T ilt the DISPLA Y CONSOLE (--) forward and connect the I-R CONTROL (A) and S-VIDEO (--) CABLES to the back of the DISPLA Y CONSOLE. 10. T ape the ends of the all CABLES (POWER, COAXIAL, I-R CONTROL, S-VIDEO) together . 1 1. Feed the taped end of the MEDIA CABLES (--) through the large hole in the back of the CONSOLE BRACKET (--).
13 M ODELS N EW 95R R ECUMBENT L IFECYCLE ® E XERCISE B IKES T OOLS R EQUIRED : Phillips Screwdriver , Metric Allen Set, M16 & M17 Wrench P ARTS N OT U SED F ROM K IT : (1) Main Bracket Cap, (1) Grommet 1. Remove the protective liner from one of the provided F ASTENER STRIPS.
I NST ALLA TION 14 9. T ilt the DISPLA Y CONSOLE (--) forward and connect the I-R CON- TROL (A) and S-VIDEO (--) CABLES to the back of the DIS- PLA Y CONSOLE.
15 M ODELS 95L I S UMMIT T RAINER T OOLS R EQUIRED : Metric Hex Key Set, Side Cutters, T -45 T orx Wrench 1. Remove the CONSOLE SUPPORT TOP CAP (a). 2. Remove the two SCREWS (b) securing the CONSOLE SUPPORT COVER (c). Remove the CONSOLE SUPPORT COVER and set it and the SCREWS aside.
I NST ALLA TION 16 M ODELS 95C I , 93C, 90C U PRIGHT L IFECYCLE ® E XERCISE B IKES T OOLS R EQUIRED : Metric Hex Key Set, Side Cutters NOTE: Proceed with the following step s before attaching the DISPLA Y CONSOLE and ACCESSORY TRA Y as described in the Assembly Instructions.
17 10. Attach the ADAPTER BRACKET (AA) to the ENTERT AINMENT CONSOLE (k) to the using four SCREWS (BB). T ighten the SCREWS to 6-8 in-lbs. Do not overtighten the SCREWS. Attach the ENTER T AINMENT CONSOLE to the UPPER MOUNTING PLA TE (m) using four SCREWS (n) and W ASHERS (o).
I NST ALLA TION 18 M ODELS 95R I , 93R, 90R R ECUMBENT L IFECYCLE ® E XERCISE B IKES T OOLS R EQUIRED : Metric Hex Key Set, Side Cutters NOTE: Proceed with the following step s before attaching the DISPLA Y CONSOLE as described in the Assembly Instructions.
19 M ODELS 95S I , 93S, 90S S T AIRCLIMBERS T OOLS R EQUIRED : Metric Hex Key Set, Side Cutters NOTE: Proceed with the following step s before attaching the DISPLA Y CONSOLE and ACCESSORY TRA Y as described in the Assembly Instructions. 1. Locate the REMOTE CONTROL (a).
I NST ALLA TION 20 M ODELS 95X I , 93X, 90X C ROSS -T RAINERS T OOLS R EQUIRED : Metric Hex Key Set , Side Cutters, T -45 T orx Wrench NOTE: Proceed with the following steps before attaching the DISPLA Y CONSOLE as described in the Assembly Instructions.
21 M ODELS 91T I , 90T T READMILLS T OOLS R EQUIRED : St andard Screwdriver , Phillip s Screwdriver , Metric Hex Key Set, Side Cutters NOTE: Proceed with the following steps immediately after attaching the DISPLA Y CONSOLE as described in the Assembly Instructions.
I NST ALLA TION 22 13 Locate the COAXIAL COUPLER (u). Remove the RET AINING NUT (v) and two WASHERS (w & x) from the COUPLER. Insert the COUPLER into the large D-SLOT located at the front of the MOTOR P AN (y). Secure the COUPLER using the two WASHERS and RET AINING NUT previ- ously removed.
23 M ODELS 97T I , 95T I , 93T T READMILLS T OOLS R EQUIRED : St andard Screwdriver , Phillips Screwdriver , Metric Hex Key Set, Side Cutters NOTE: Proceed with the following step s immediatle after att aching the DISPLA Y CONSOLE as described in the Assembly Instructions.
I NST ALLA TION 24 7. Attach the ADAPTER BRACKET (n) to the ENTERT AINMENT CONSOLE (o) to the using four SCREWS (p). T ighten the SCREWS to 6-8 in-lbs. Do not overtighten the SCREWS. Attach the ENTER T AINMENT CONSOLE to the MOUNTING BRACKET (q) using four SCREWS (r) and W ASHERS (s).
25 C ONSOLE C ABLE C ONNECTIONS VGA IN Audio out Vid eo In S-Video In RF Coaxial Audio In Right Left Wired Remote / Media Cable Power In High Definition Input.
I NST ALLA TION 26.
27 M051-00K71-A002.
An important point after buying a device Life Fitness 90S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 90S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 90S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 90S you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 90S will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 90S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 90S.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 90S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 90S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
