Instruction/ maintenance manual of the product 8352100 REV. B Life Fitness
Go to page of 26
G7 CABLE MOTION ™ GYM SYSTEM A SSEMBL Y INSTRUCTIONS G7-002 / CLASS H / 10/14/08 / 8352100 REV . B.
2 T ABLE OF CONTENTS Safety S tatement . . . . . . . . . . . . . . . .2 Required Hardware . . . . . . . . . . . . . . . .8 G7 W arning Labels . . . . . . . . . . . . . . .4 Assembly Instructions . . . . . . . . . . . . . .10 Gym Dimensions. . . . . . .
3 INSPECTION 1. DO NOT use or permit use of any equipment that is damaged and or has worn or broken part s. For all LIFE FITNESS equipment use only replacement part s supplied by LIFE FITNESS. 2. Cables and Belts pose an extreme liability if used when frayed.
4 G7 W ARNING LABELS NOTE: Lock the weight stack when not using the gym. Make sure all the weight plates are resting on the plate below with no gap in between. Insert the weight selector pin in the tab underneath the weight st ack. The weight selector pin should be inserted until the knob touches the metal t ab.
5 GYM DIMENSIONS Weight: 720 lbs Resistance Ratio: 1:2 Weight S tack: 160 lbs.
6 G7 LIVE AREA 12” 12” 1 0’ 18’-8” NOTE: The live area shows the extent of the G7 gym. It does not include the user ..
7 COMPONENTS LIST ITEM NO. QTY . DESCRIPTION 1 1 LEFT TOWER 2 1 TOP BRACKET TUBE 3 1 MIDDLE BRACKET TUBE 4 1 BOTTOM BRACKET TUBE 5 1 LEFT SLIDE TUBE (WITH ROLLER CARRIAGE) ASSEMBL Y 6 1 RIGHT U BRACKE.
8 COMPONENTS LIST HARDW ARE ITEM NO. QTY . DESCRIPTION 43 32 M10 X 20MM SCREW 44 58 M10 W ASHER 45 20 M5 HEX SCREW 46 20 M6 W ASHER 47 4 M10 X 55MM SCREW 48 2 M10 X 45MM SCREW 49 13 M10 HEX NYLOCK NUT.
9 HARDW ARE: M10 X 50MM HEX TENSION SCREW (#55) M10 HEX NYLOCK NUT (#49) M10 SOCKET NUT (#51) M10 W ASHER (#44) M10.5 W ASHER (#58) M10 X 20MM SCREW (#43) M5 HEX SCREW (#45) M5 SHOULDER SCREW (#56) M6.
10 1 44 43 44 43 2 3 11 4 44 43 44 43 1 11 A B NOTE: T wo person assembly is recommended. STEP 1: Use the following hardware contained in Blister Pack (7-1): M10 x 20mm SCREW (Qty . 24) M10 W ASHER (Qty . 24) Make sure the LEFT T OWER (1) and the RIGHT TOWER (1 1) are positioned correctly prior to assembly .
11 12 50 44 44 49 1 11 44 50 STEP 2: Use the following hardware contained in Blister Pack (7-1): M10 x 70mm SCREW (Qty . 4) M10 W ASHER (Qty . 8) M10 HEX NYLOCK NUT (Qty .
12 STEP 3: Use the following hardware contained in Blister Pack (7-2): M10 x 45mm SCREW (Qty . 2) M10 W ASHER (Qty . 8) M10 HEX NYLOCK NUT (Qty . 4) M10 x 55mm SCREW (Qty . 2) Slide the top of the LEFT SLIDE TUBE ASSEMBL Y (5) over the UPPER BRACKET (C) on the LEFT T OWER (1).
13 STEP 4: Use the following hardware contained in Blister Pack (7-2): M5 SHOULDER SCREW (Qty . 32) M5 HEX SCREW (Qty . 8) M6 W ASHER (Qty .
14 55 15 54 18 17 G 20 16 11 19 26 59 STEP 5: Use the following hardware contained in Blister Pack (7-3): M10 x 50mm HEX TENSION SCREW (Qty . 4) GUIDE ROD RET AINER (Qty . 4) RET AINER RING (Qty . 4) NOTE: INST ALL FROM THE INSIDE OF THE UNIT .
15 STEP 6: Uncoil the cables to remove all twists. Remove the (UPPER) PULLEYS (13) on the RIGHT T OWER (1 1) and LEFT TOWER (1) by removing the M10 x 50mm SCREW (52), PULLEY RET AINER (53), M10 SOCKET HEAD NUT (51), and P ARTIAL PULLEY COVERS (14).
16 STEP 7: Use the following hardware contained in Blister Packs (7-3), (7-4) and (7-5): M10 W ASHER (Qty . 4) M10 HEX NYLOCK NUT (Qty . 2) M10 x 45mm SCREW (Qty . 2) M10 SOCKET HEAD NUT (Qty . 2) M10 x 50mm SCREW (Qty . 2) PULLEY RET AINER (Qty .
Slide Mechanism to insert or Exchange Handles Cable K M J L K I 17 STEP 8: Dissemble one QUICK CONNECT by removing the two M5 HEX SCREWS (M) from the QUICK CONNECT COU- PLER (I). Carefully remove the QUICK CONNECT SPRING (L), the QUICK CONNECT SLEEVE (K) and the QUICK CONNECT HOUSING (J).
18 STEP 9: Make adjustments to the HEAD PLA TE PULLEY (19) and the threaded cable end to adjust cable length and to ensure the cable is taut. If the threaded cable end is completely threaded into the LEFT ROLLER CARRIAGE (28) and there is still some slack in the CABLE (21), remove the pulley from the HEAD PLA TE PULLEY (19).
19 22 44 43 43 44 1 STEP 10: Use the following hardware contained in Blister Pack (7-4): M10 x 20mm SCREW (Qty . 8) M10 W ASHER (Qty . 8) Install one FOOT EXTENSION (22) to the bottom of the LEFT T OWER (1) using four M10 x 20mm SCREWS (43) and four M10 W ASHERS (44).
20 11 3 25 46 45 58 57 24 50 44 44 49 3 25 STEP 1 1: Use the following hardware contained in Blister Pack (7-6): M5 HEX SCREW (Qty . 12) M6 W ASHER (Qty . 12) M10 x 16mm SCREW (Qty . 12) M10.5 W ASHER (Qty . 12) M10 x 70mm SCREW (Qty .
21 STEP 12: Adjust the rollers if the ROLLER CARRIAGE (28) rolls up and down the tube with dif ficulty , or if it seems to sloppy . Unscrew the cable end from the roller carriage housing. Remove the SCREWS (N) that hold the two PLASTIC COVERS (O) together .
22 39 31 32 36 35 STEP 13: The G7 comes with the following accessories: THIGH STRAP (31), FOOT STRAP (32), HANDLES (35), SNAP LINKS (36), LONG BAR (41), and EXERCISE BALL (39).
23 STEP 14: Use the FRONT HANDLE (Q) to tilt the bench. S teer the bench to align with the U BRACKETS (R). Insert one PIN (S) into each bracket so the bench is restrained.
24 MAINTENANCE Please note: * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water . T ouch-up paint can be purchased from your Life Fitness cus- tomer service representative at (800) 351-3737. * Inspect equipment before each use.
25 LIMITED W ARRANTY Life Fitness® G7 Cable Motion™ Gym System Life Fitness extends the following LIMITED W ARRANTY to the original owner (proof of purchase required, keep your receipt with this manual) of the Life Fitness product. The W arranty terms apply to IN HOME and LIGHT INSTITUTIONAL USE ONL Y .
C ORPORA TE H EADQUARTERS 5100 North River Road Schiller Park, Illinois 60176 • U.S.A. 847.288.3300 • F AX: 847.288.3703 800.735.3867 (T oll-free within U.S.A., Canada) I NTERNA TIONAL O FFICES G7-002 Rev A 10/08 A MERICA ’ S North America Life Fitness Inc.
An important point after buying a device Life Fitness 8352100 REV. B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 8352100 REV. B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 8352100 REV. B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 8352100 REV. B you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 8352100 REV. B will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 8352100 REV. B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 8352100 REV. B.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 8352100 REV. B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 8352100 REV. B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
