Instruction/ maintenance manual of the product 8246 50LB Life Fitness
Go to page of 7
Part # 6813001 Revision: 1/11/99 1 8246 50 LB. ADD-ON KIT ASSEMB LY INSTRUCTIONS.
IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the LIFE FITNESS 8246 50 LB ADD-ON KI T . Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
3 PARTS LIST PART # 6284501 6812801 6382301 KE Y 1 2 3 QT Y 1 1 1 KE Y 4 5 6 PART # 6703801 6198501 6214501 DESCRIPTION WEIGHT STACK LABEL (lbs.) WEIGHT STACK LABEL (1-25) WEIGHT PL ATES QT Y .
4 FIGURE 3 STEP 3: • LOOSEN the SHAFT COLLAR SET SCREWS and slide them off the GUIDE RODS. 1/2 X 4 ” BOLT (EXISTING) TOWER BRACE GUIDE RODS TOWER SHAFT COLLARS • Remove two 1/2 X 4 ” BOLTS, two 1/2 ” W ASHERS, and two 1/2 ” LOCK NUTS from the TOWER BRACE to remove the TOWER BRACE from the TOWER and GUIDE RODS as shown in FIGURE 3.
5 FIGURE 4 HEAD PLATE TOWER • Unbolt the old WEIGHT STACK SHAFT from the HEAD PLATE and replace it with the new 25 HOLE WEIGHT STACK SHAFT (1). (NOTE: The bolt hole in the HEAD PLATE should be on top.
6 FIGURE 5 STEP 5: 1/2 X 4 ” BOLT (EXISTING) TOWER BRACE GUIDE RODS TOWER SHAFT COLLARS 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Route loop end of new CABLE (68128) (2) around pulleys in TOWER BRACE, LOWER CROSS SUPPORT, AND BENCH FRAME, then fasten to LEG PEDESTAL as shown in FIGURE 6.
7 STEP 7: • Screw the threaded end of the new CABLE (68128) (2) approximately 3/4 ” into the end of the WEIGHT STACK SHAFT (1) and tighten jam nut securely. • If the HEAD PL ATE does not sit on top of the first WEIGHT PL A TE, push the head plate down, insert the SELECTOR PIN and perform several repetitions on the machine.
An important point after buying a device Life Fitness 8246 50LB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 8246 50LB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 8246 50LB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 8246 50LB you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 8246 50LB will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 8246 50LB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 8246 50LB.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 8246 50LB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 8246 50LB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
