Instruction/ maintenance manual of the product 8235 Life Fitness
Go to page of 15
8235 LEG EXTENSION/LEG CUR L Part # 6869701 Revision:2/21/00 1 ASSEMBLY INSTRUCTION S.
IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the LIFE FITNESS 8235 LEG EXTENSION/LEG CURL. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
3 PARTS LIST PART # 6793303 6662303 6662203 6764901 6782301 6770502 6777403 6780703 6867203 6781303 6698303 6625502 6693502 6780401 6780201 6791102 6427101 6776601 6284501 6714601 3116101 3117305 6782.
STEP 1: FIGURE 1 • LOOSELY assemble LOWER CROSS SUPPORT (8) to the TOWER (1) using two 1/2 X 4 ” BOLTS (33), two 1/2 ” WASHERS (40) and one 1/2 ” LOCK NUT (43). See FIGURE 1. 1 33 1/2 X 4 ” 8 43 4 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Slide the SHROUD (16) between the TOWER (1) as shown in FIGURE 1.
STEP 2: FIGURE 2 • LOOSELY assemble BENCH FRAME (7) to the LOWER CROSS SUPPORT (8) using two 1/2 X 4 ” BOLTS (33), two 1/2 ” WASHERS (40) and two 1/2 ” LOCK NUTS (43).
STEP 3: FIGURE 3 6 STEP 4: • SECURELY assemble the LEFT (2) and RIGHT (3) LEG EXT. HANDLES to the BENCH FRAME (7) using two 3/8 X 3-1/4 ” BOLTS (35), four 3/8 ” WASHERS (41), and two 3/8 ” LOCK NUTS (44). See FIGURE 3. • Slide two HINGE TABS (45) onto the BENCH FRAME (7) as shown in FIGURE 3.
STEP 5: FIGURE 5 7 STEP 6: FIGURE 6 • SECURELY assemble SEAT PAD (15) to HINGE TABS (45) using two 3/8 X 1-1/4 ” BOLTS (38) and two 3/8 ” WASHERS (41). See FIGURE 5. • SECURE LY assemble one 1/2 X 7-7/8 ” SPRING PIN (46) to the BENCH FRAME (7) as shown in FIGURE 5.
FIGURE 7 8 STEP 7: FIGURE 8 • SECURELY assemble BACK PAD (14) to the RIGHT & LEFT PAD SUPPORTS (12) (13) using four 3/8 X 3 ” BOLTS (36) and four 3/8 ” WASHERS (41) as shown in FIGURE 7. STEP 8: 4 7 • Assemble one 1-1/4 ” RUBBER BUMPER (28) to the middle of the plate on the BENCH FRAME (7) as shown on FIGURE 8.
STEP 10: 9 • SECURE LY assemble two 3/8 ” SPRING PINS (47) to the PAD SLEEVES (6) as shown in FIGURE 10. (NOTE: IMPORTANT! Tighten SPRING PIN completely.) • Assemble four ROLLER PADS (4) to the PAD SLEEVES (6) using four 1-5/16 ” SHAFT COLLARS (53).
10 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 12 STEP 12: STEP 11: FIGURE 11 • Snap two WEIGHT PLATE BUSHINGS (25) into the top of all twenty WEIGHT PLATES (57) as shown in FIGURE 11. 25 57 5 3/8 X 1-1/4 ” 38 20 41 19 57 26 1 56 55 52 • Insert the two GUIDE RODS (5) into the base of the TOWER (1) as shown in FIGURE 12.
FIGURE 14 11 STEP 14: • SECURELY assemble two 4-1/2 ” PULLEYS (21) to the TOWER BRACE (10) using two 3/8 X 2 ” BOLTS (37), and two 3/8 ” LOCK NUTS (44). See FIGURE 14. 44 37 3/8 X 2 ” 21 10 29 FIGURE 13 STEP 13: • Attach two 1 X 1 ” GLIDES (29) to the LEFT & RIGHT PAD SUPPORTS approximately where shown in FIGURE 13.
0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 12 FIGURE 15 • Place TOWER BRACE (10) over the GUIDE RODS (5) and SECURELY assemble TOWER BRACE (10) to TOWER (1) using two 1/2 X 4 ” BOLTS (33), two 1/2 ” WASHERS (40), and two 1/2 ” LOCK NUTS (43) as shown in FIGURE 15.
13 FIGURE 18 STEP 18: • Attach the to the KEYHOLE CLEVIS(17) to the CABLE (23) as shown in FIGURE 18. FIGURE 17 STEP 17: • SECURE LY assemble three 4-1/2 ” PULLEYS (21) to the brackets on the BE.
14 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 19 STEP 19: • Assemble the KEYHOLE CLEVIS (17) to the tab on the cam of the LEG PEDESTAL (9) using one CLEVIS PIN (22) and one COTTER PIN (24) as shown in FIGURE 19. • Insert ball end of CABLE (23) through slot of the BENCH FRAME (7) and around LEG PEDESTAL (9) as shown in FIGURE 19.
FIGURE 20 15 STEP 20: • Screw the treaded end of the CABLE (23) approximately 3/4 ” into the end of the WEIGHT STACK SHAFT (19) and tighten jam nut securely.
An important point after buying a device Life Fitness 8235 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 8235 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 8235 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 8235 you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 8235 will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 8235, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 8235.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 8235. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 8235 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
