Instruction/ maintenance manual of the product 8115 Life Fitness
Go to page of 9
8115 FL AT & INCLINE BENCH Part # 6791801 Revision:7/20/98 1 ASSEMBLY INSTRUCTION S.
IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the LIFE FITNESS 8115 FL AT & INCLINE BENCH. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
3 PARTS LIST PART # 6651703 6700503 6712803 6697203 6624202 6624302 6651602 6780001 6780301 3202106 3202107 3102917 3102910 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 QTY 1 1 1 1 1 1 2 1 1 1 1 2 2 KE Y 14 15 1.
STEP 2: FIGURE 2 • SECURELY assemble the 3/8 ” SPRING PIN (23) to the ADJUSTABLE SLEEVE (3) as shown in FIGURE 2. 4 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Pull back the 3/8 ” SPRING PIN (23) on the ADJUSTABLE SLEEVE (3) and slide it over the end of the BENCH FRAME (2) as shown in FIGURE 2.
STEP 3: FIGURE 3 5 • SECURE LY assemble the REAR UPRIGHT (1) to the BENCH FRAME (2) using two 1/2 X 3 ” BOLTS (13), four 1/2” WASHERS (16), and two 1/2 ” LOCK NUTS (18) as shown in FIGURE 3.
STEP 4: FIGURE 4 6 • Assemble the LEFT & RIGHT BACK PAD ANGLES (5 & 6) and two HINGE TABS (20) to the BENCH FRAME (2) using one 1/2 X 9-1/2 ” BOLT (10) and one 1/2 ” LOW HEIGHT LOCK NUT (19). (NOTE: Tighten connection enough to remove play yet allowing the parts to rotate freely.
7 STEP 5: FIGURE 5 • Assemble the LEFT & RIGHT BACK PAD ANGLES (5 & 6) and two HINGE TABS (20) to the BENCH FRAME (2) using one 1/2 X 9-1/2 ” BOLT (10) and one 1/2 ” LOW HEIGHT LOCK NUT (19). (NOTE: Tighten connection enough to remove play yet allowing the parts to rotate freely.
8 FIGURE 6 STEP 6: 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECURE LY assemble the BACK PAD (9) to the LEFT & RIGHT BACK PAD ANGLES (5 & 6) using four 3/8 X 1-1/4 ” BOLTS (15) and four 3/8 ” W ASHERS (17) as shown in FIGURE 6.
STEP 7: 9 FIGURE 7 • SECURE LY assemble the SE AT PAD (8) to the HINGE TABS (20) using two 3/8 X 1-1/4 ” BOLTS (15) and two 3/8 ” W ASHERS (17) as shown in FIGURE 7. 3/8 X 1-1/4 ” 15 17 8 20 Thank you for purchasing the LifeFitness 8115 FL AT & INCLINE BENCH.
An important point after buying a device Life Fitness 8115 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 8115 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 8115 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 8115 you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 8115 will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 8115, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 8115.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 8115. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 8115 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
