Instruction/ maintenance manual of the product 360101 Life Fitness
Go to page of 11
Serious Steel 1360101 375 LEG PRESS ADAPTER KITi ASSEMBLY INSTRUCTION Part # 6837701 1 Eevision: 07/06/99.
]IMPORTA~, ,T N~)TES 1 There is a risk assumed by individuals who use this type of equipment. To minirrrize risk, please follow these rules: 1. Consult your physician before beginning any exercise program. 2. Inspect equipment daily. Tio~hten all loose connections and replace worn parts immediately.
" ~ 5 6 7 8 PART# DESCRIPTION 6838003 FRON~FLEG 6693902 Pig I .FY BRACKET 6838103 ’ BASE CONNECTION 3116i01 3-V2"eULLZY 6405201 2" SQ.
STACK GUARD FIGURE 4 BASE ~ 1/2 WASHER 1/2 X 4" BOLT STEP 4 ¯ Remove two 1/2 X 4" BOLTS, two 1/2" WASHERS, and two 1/2" LOCK NUTS from the BASE and STACK GUARD as shown in FIGURE 4.
REMOVE STEP 6 Remove the existing CABLE (part #68331) using the following steps: ¯ Disconnect LAT BAR from TOP BOOM. ¯ Unscrew the threaded end of CABLE from the HEAD PLATE ASSEMBLY. ¯ Route the CABLE around the FLOAT~’G PULLEY as shown in FIGURE 6.
FIGURE 7 IMPORTANT: Cable must run in all the pulley grooves. ;TEP 7 Install the NEW PRIMARY CABLE (13) using the following steps: ¯ Route the CABLE (13) through the TOP BOOM as sho~a in FIGURE 7. The pulleys in TOP BOOM may need to be temporarily removed to perform this step.
FIGURE 8 STEP 8 ~3/8 X2" Loop CABLE (13) around one 3-1/2" PULLEY (4) in the PULLEY BRACKET (2) and SECURELY assemble using one 318 X 2" BOLT (10), and two 3/8" WASHERS (8) and one.
WA SPACER / DONOT 3/8 X 4-1/2" BOLT FIGURE 10 STEP 10 ¯ Assemble the LEG PRESS CABLE (14) to the ADJUSTMENT TUBE on the 832 using the existing previoasly removed 3/8 X 4-1/2"’ BOLTS, SPACERS, WASHERS, 2" WHEELS AND NUT. (Note: Do not overtighten! Tighten only until nut is completely on bolL) FIGURE 10.
FIGURE 11 STEP 11 ¯ Secure~yfastenthe832LEGPRESSt~theFRONTLEG(~)usingtw~/2X3~BOLTS(~)~tw~/2~WASHE~‘S(~5)~andtw~/2~L~CK NUTS (16) as shown in FIGURE 11.
3/8 X 2", FIGURE 12 STEP 12 ¯ Attach one 3-1/2" PULLEY (4) to the FRONT LEG (1) and one 3-1/2" PULLEY (4) to the BASE CONNEC([’ION (3) Using 2" BOLTS (10), four 3/8" WASHERS (8) and two 3/8" LOCKNI_rTS (9). (Note: Make sure CABLE (14) is running pUI ~! ,~YS.
ADJUST! ~ SPRIG PIN ADJUSTMENT FIGURE 14 STEP 14 ¯ The 832 LEG PRESS is equipped with a spring pin adjustment to accommodate different sized users and allew eas)" entry and e,,dt from the machine. To use, you must slightly push against the foot plates to take tension offthe pin.
An important point after buying a device Life Fitness 360101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 360101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 360101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 360101 you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 360101 will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 360101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 360101.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 360101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 360101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
