Instruction/ maintenance manual of the product 3 Tier Dumbbell Rack Life Fitness
Go to page of 9
3 Tier Dumbbell Rack Owners Manual.
Item 1 2 3 4 5 6 7 8 9 Qty 3 1 1 12 24 24 12 12 12 4) 6) 5) 8&9 ) 7) Tools Required: O 9/16 W rench O Ratchet - 9/16 Sock et O Rubber Mallet Description Tier Left End Right End 3/8 x 67mm Bolt 3/8.
1. LOOSELY assemble the three TIERS (1) between the LEFT and RIGHT ENDS (2 & 3) starting with the bottom tier, using twelve 3/8 X 67mm BOLTS (4), twenty-four 3/8" SAE WASHERS (5), twenty-four 3/8" RH WASHERS (6), twelve 3/8" LOW HT LOCK NUTS (7), twelve BLACK RH CAPS (8) and twelve frame color RH CAPS (9).
It is the sole responsibility of the purchaser of LIFE FITNESS products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of LIFE FITNESS exercise equipment be informed of the following information prior to its use.
WARRANTY WHAT IS COVERED This Life Fitness commercial exercise equipment (3 Tier Dumbbell Rack) is warranted to be free of all defects in material and workmanship. WHO IS COVERED The original purchaser or any person receiving the Product as a gift from the original purchaser.
EXCLUSIVE WARRANTY THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART.
General Specifications 1. Frame Construction Frame is constructed of mechanical quality steel purchased in mill run quantities Frame is primarily 2 x 3 tubing with 11 gauge wall thickness. 2. Frame Finish Prior to applying finish, each part is chemically washed to prepare surface for maximum adhesion 3.
3 Tier Dumbbell Rack 4. Maintenance INSPECT O Hardware should be checked for looseness. Tighten as required using 9/16 wrench and 9/16 socket. O Frames should be inspected for wear or damage. All paint chips should be filled immediately with touch-up paint.
© 2005 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitnessis a registered trademark of Brunswick Corporation. CSDB3T 6.
An important point after buying a device Life Fitness 3 Tier Dumbbell Rack (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 3 Tier Dumbbell Rack yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 3 Tier Dumbbell Rack - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 3 Tier Dumbbell Rack you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 3 Tier Dumbbell Rack will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 3 Tier Dumbbell Rack, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 3 Tier Dumbbell Rack.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 3 Tier Dumbbell Rack. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 3 Tier Dumbbell Rack along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
