Instruction/ maintenance manual of the product UIG1313 Liebherr
Go to page of 8
Operating instructions Under-worktop freezer for integrated use, door-on-door 180510 7084170 - 00 UIG1313 ... 3.
Contents 1 Appliance at a glance ............................................ 2 1.1 Description of appliance and equipment .................. 2 1.2 Range of appliance use ............................................ 2 1.3 Conformity ..................
- Do not place appliance in areas of direct sunlight or next to a stove, heater or similar object. - The energy consumption depends on the installation condi- tions, e.g. the ambient temperature (see 1.2) . - Keep the time the appliance is open to a minimum.
Standard EN 378 specifies that the room in which you install your appliance must have a volume of 1 m 2 per 8 g of R 600a refrig- erant used in the appliance. If the room in which the appliance is installed is too small, a flammable gas-air mixture may form in the event of a leakage in the refrigeration circuit.
5.2 Freezing food The maximum weight of fresh food which can be frozen within 24 h is indicated on the type plate under "freezing capacity ... kg/ 24h". The maximum load of frozen food for the drawers is 25 kg each and for the shelves 35 kg each.
5.10 Cold storage accumulators The cold storage accumulators prevent the temperature from rising too fast in the event of power failure. 5.10.1 Using cold storage accumulators u Freeze and store the cold storage accumu- lators in the ceiling of the freezer compart- ment (appliances without No-Frost module).
u Notify the customer service, specifying the fault, appliance designation Fig. 4 (1) , service No. Fig. 4 (2) and serial No. Fig. 4 (3) . w This will help us to provide you with a faster and more accurate service. u Keep the appliance closed until the customer service arrives.
Disposing of the appliance 8.
An important point after buying a device Liebherr UIG1313 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr UIG1313 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr UIG1313 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr UIG1313 you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr UIG1313 will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr UIG1313, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr UIG1313.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr UIG1313. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr UIG1313 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
