Instruction/ maintenance manual of the product UG 1211 Comfort Liebherr
Go to page of 8
Operating instructions Under-worktop freezer with decor panel 280110 7084186 - 00 UG 1211 ... 1.
Contents 1 Appliance at a glance ............................................ 2 1.1 Description of appliance and equipment .................. 2 1.2 Range of appliance use ............................................ 2 1.3 Conformity ..................
1.4 Saving energy - Always ensure good ventilation. Do not cover ventilation openings or grille. - Do not place appliance in areas of direct sunlight or next to a stove, heater or similar object. - The energy consumption depends on the installation condi- tions, e.
WARNING Fire hazard due to dampness! If live parts or the mains lead become damp this may cause short circuits. u The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.
the frequency of door opening the room temperature of the installation site the type, temperature and quantity of frozen food u You may have to readjust the temperature, depending on the temperature wanted. if the freezer is relatively empty: u readjust temperature after 6 h.
CAUTION Risk of injury and damage as a result of hot steam! Hot steam may damage the surfaces and cause burns. u Do not use any steam cleaners! NOTICE Incorrect cleaning damages the appliance! u Do not use cleaning agents in concentrated form. u Do not use any scouring or abrasive sponges or steel wool.
8 Decommissioning 8.1 Switching off the appliance u Using a coin, turn the temperature control Fig. 2 (1) to 0. 8.2 Taking the appliance out of service u Empty the appliance. u Pull out the power plug. u Clean the appliance (see 6.2) . u Leave the door open to prevent odour.
Disposing of the appliance 8.
An important point after buying a device Liebherr UG 1211 Comfort (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr UG 1211 Comfort yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr UG 1211 Comfort - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr UG 1211 Comfort you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr UG 1211 Comfort will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr UG 1211 Comfort, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr UG 1211 Comfort.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr UG 1211 Comfort. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr UG 1211 Comfort along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
