Instruction/ maintenance manual of the product IG 1166 Premium Liebherr
Go to page of 8
Operating instructions Freezer for integrated use, door-on-door 280110 7082542 - 02 IG/ SIG ... 6.
Contents 1 Appliance at a glance ............................................ 2 1.1 Description of appliance and equipment .................. 2 1.2 Range of appliance use ............................................ 2 1.3 Conformity ..................
- The energy consumption depends on the installation condi- tions, e.g. the ambient temperature (see 1.2) . - Keep the time the appliance is open to a minimum. - Store food logically. - Ensure that all food is well packed and covered for storage. This will prevent frost from forming.
4.2 Installing the appliance In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains. The floor at the site must be flat and level. Do not install the appliance in a location where it is exposed to direct radiation of the sun, next to a cooker, heater and similar.
5.2 Child proofing The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children. 5.2.1 Setting the child lock u To activate the setting mode: press SuperFrost button Fig. 2 (5) for about 5 s.
u Briefly press the SuperFrost button Fig. 2 (5) once. w The SuperFrost button Fig. 2 (5) shines. w The freezer temperature drops, the appliance operates with maximum refrigerating performance. For a small amount of food: u wait about 6 h. u Place the fresh food in the bottom drawers.
u Remove detached pieces of ice. u Pay attention that the defrost water does not run into the kitchen unit. u If necessary, pick up defrost water several times, using a sponge or cloth.
The temperature display indicates: F0 to F5 . → There is a fault. u Contact the customer service (see Maintenance). The temperature display indicates: nA → The freezer temperature rose too high over the last hours or days due to a power failure or power interruption.
An important point after buying a device Liebherr IG 1166 Premium (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr IG 1166 Premium yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr IG 1166 Premium - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr IG 1166 Premium you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr IG 1166 Premium will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr IG 1166 Premium, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr IG 1166 Premium.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr IG 1166 Premium. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr IG 1166 Premium along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
