Instruction/ maintenance manual of the product 211111 7085270 - 00 Liebherr
Go to page of 8
Installation instructions Under-worktop refrigerators and freezers, for integrated use 211111 7085270 - 00 UIK/ UIG ... 3.
Contents 1 General safety information................................... 2 2 Putting into operation............................................ 2 2.1 Installing the appliance............................................. 2 2.2 Changing over door hinges.
If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance. u Always see to good ventilation at the installation site.
u Transfer top and bottom fastening screws Fig. 2 (2) to the opposite side. Screws are self-tapping. Use cordless screwdriver: u Unscrew Fig. 5 (7) the hinges from the door, transfer them diagonally and screw them firmly into place (with 4 Nm) . u Close the vacated fastening holes with the accompa- nying stoppers Fig.
Fig. 8 Built-under variants : Fig. 9 for recess height 820 or 870 mm A = Height of recess B = Height of unit plinth C = Height of unit door D = Base height of cut-away unit plinth Recess height A Heig.
Fig. 12 u Pull the plinth forwards to remove it. Possibly remove the bottom door rack for easier installation. u Align the appliance by adjusting the feet so that it stands straight: Extend the rear adjustable-height feet by turning the screws Fig. 12 (3) .
Fig. 18 u Attach the unit door to the adjusting bolts Fig. 18 (13) and loosely screw the locknuts Fig. 18 (10) onto them. u Close the door. u Check the gap between the door and the surrounding unit doors. u To laterally align the door: push unit door in X direction.
For appliances without soft stop mechanism adjust door stop cushioning. The door stop cushioning can be adjusted if necessary using the accompanying Allen key 5: u For stronger spring force: turn clockwise. u For lesser spring force (as-deliv- ered): turn anticlockwise.
An important point after buying a device Liebherr 211111 7085270 - 00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr 211111 7085270 - 00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr 211111 7085270 - 00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr 211111 7085270 - 00 you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr 211111 7085270 - 00 will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr 211111 7085270 - 00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr 211111 7085270 - 00.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr 211111 7085270 - 00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr 211111 7085270 - 00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
