Instruction/ maintenance manual of the product eMac 073-0704 Apple
Go to page of 13
073-0704 Re v . C eMac Computers Stand Installation Installing the Optional Stand F ollow the instructions f or the type of eMac that y ou hav e . The procedure f or installing the stand on the eMac (A TI Graphics) and eMac (USB 2.0) is slightly diff erent from the original eMac model.
Stand Installation - 2 eMac Installation Pr ocedur e T o install the eMac stand: 1. Sav e open documents and quit all open applications . 2. T ur n the computer off b y choosing Shut Down from the Special men u (if using Mac OS 9), or choose Shut Down from the Apple men u if using OS X.
Stand Installation - 3 6. The stand attaches to the locations circled below . 7. Remov e the scre w located between the computer’ s f eet..
Stand Installation - 4 8. P osition the stand on top of the screw holes. 9. Note: The stand slides back and f or th. T o attach the first scre w , slide the stand toward the back of the computer .
Stand Installation - 5 10. Tighten the first screw . 11. Slide the stand f orward to access the tw o rear screws ..
Stand Installation - 6 12. Tighten the screw on the left. 13. Tighten the screw on the right..
Stand Installation - 7 14. Carefully tur n the computer o v er ..
Stand Installation - 8 eMac (A TI Graphics) and eMac (USB 2.0) Installation Pr ocedur e T o install the eMac (A TI Graphics) or eMac (USB 2.0) stand: 1.
Stand Installation - 9 6. The stand attaches to the locations circled below . 7. Remov e the scre w circled below ..
Stand Installation - 10 8. P osition the stand in place over the scre w holes . 9. Note: The stand slides back and f or th. T o attach the first scre w , slide the stand toward the back of the computer .
Stand Installation - 11 10. Push the stand f orward. Tighten the second screw . 11. Tighten the third screw ..
Stand Installation - 12 12. Carefully tur n the computer o v er ..
Stand Installation - 13 Apple Computer , Inc. © 2004 Apple Computer , Inc. All rights reser v ed. This document is protected under U .S . Cop yright Law and International T reaties, and no par t of this document ma y be reproduced in any f orm without written per mission from Apple.
An important point after buying a device Apple eMac 073-0704 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apple eMac 073-0704 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apple eMac 073-0704 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apple eMac 073-0704 you will learn all the available features of the product, as well as information on its operation. The information that you get Apple eMac 073-0704 will certainly help you make a decision on the purchase.
If you already are a holder of Apple eMac 073-0704, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apple eMac 073-0704.
However, one of the most important roles played by the user manual is to help in solving problems with Apple eMac 073-0704. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apple eMac 073-0704 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
