Instruction/ maintenance manual of the product 4810-11 ABC Office
Go to page of 8
1 “When You Need More Than Staples.” Toll Free: 800 - 658 - 8788 Fax: 801 - 927 - 3037 info@abcoffice.com IDEAL CUTTERS Model 4810 (18 - 3/4”) Model 4810 - 11 (18 - 3/4”) Model 5210 (20 - 1/2.
2 Safety Rules • Ensure t hat at no time more than one person is working at the machine. • Leave the key for the safety lock with the person responsible for the cutting machine. • Power operated cutting machines must be operated only by trained and reliable personnel.
3 The entire machine is dispatched in one package, but the stand (#7) and the hand wheel (#19) for the paper clamp have been dismounted from the machine. The tool box contains: - a set of tools for service and maintenance, - the mounting hardware for the stand, - the back gauge crank (#3) with a mounting screw, - two keys for the safety lock.
4 Turn main switch (#11) to position “|” (on), in order to begin operation. The main switch can be sued as an EMERGENCY SWITCH, which stops the machine immediately. • Safety lock with key (#6) Th e key can be removed to prevent unauthorized use.
5 Turn to the right: back gauge moves towards the knife. Turn to the left: back gauge moves away from the knife. For prec ise setting of the measurement always move the back gauge from the back towards the knife. • Measuring scale Under the viewing window (#14) the measurement scale rotates in accordance with the back gauge movement.
6 The knife change must be executed by one person only. The cutting edge of the knife is extremely sharp. I n order to avoid injuries, the knife has to be handled with the utmost care. Transportation of knife is only permitted in specially designed wooden cases, which are supplied with every spare knife ordered from your local distributor.
7 19. Make a test cut with a paper pile using the full cutting height. If necessary do a final adjustment with the cutting depth adjustment screw (#4). 20. IMPORTANT – The clamp bar must be adjusted in a way that the cutting edge of the kn ife in its home position is covered by the clamp bar.
8 1. The guide grooves and all other moving parts of the clamp assembly. 2. The knife carrier guide chann els (left and right). They are located between the knife guide plates. 3. All moving parts of the knife drive system. To reach these parts, the lower machine cover (#9) and / or the front table (#13) must be removed.
An important point after buying a device ABC Office 4810-11 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ABC Office 4810-11 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ABC Office 4810-11 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ABC Office 4810-11 you will learn all the available features of the product, as well as information on its operation. The information that you get ABC Office 4810-11 will certainly help you make a decision on the purchase.
If you already are a holder of ABC Office 4810-11, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ABC Office 4810-11.
However, one of the most important roles played by the user manual is to help in solving problems with ABC Office 4810-11. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ABC Office 4810-11 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
