Instruction/ maintenance manual of the product ATI Graphics Apple
Go to page of 8
eMac (ATI Graphics) and eMac (USB 2.0) Memory Replacement Instructions F ollow the instructions in this sheet carefully . F ailure to follo w these instructions could damage your equipment and v oid its warranty . Note: Wr itten and video instructions cov ering customer-installable par ts are av ailable at http://www .
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 2 4. Place a soft tow el or cloth on the desk or surf ace. P osition the computer so the screen is f acing down on the cloth. 5. Use a Phillips screwdriv er to remov e the screw on the user access door .
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 3 6. Important: To avoid electrostatic discharge, always ground yourself by touching metal before you touch any parts or install components inside the computer. To avoid generating static electricity, do not walk around the room until you have finished installing the memory and closed the computer.
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 4 Removing the Installed Memory 1. Push down the ejectors on the slot of the memory module you want to replace . (Figure 4) Figure 4 2. Holding the memor y b y both top cor ners, pull it str aight out of the computer .
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 5 Installing Memory RAM Expansion Module Specifications The RAM e xpansion modules used in the eMac and eMac (A TI Graphics) computers are 168-pin SDRAM DIMMs (dual inline memor y modules) that are 3.3 V , unbuff ered, 8-byte, non-parity , PC-133 compliant.
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 6 3. Align the replacement memor y module in the memory slot, apply pressure ev enly to both top corners, and push the memor y into the slot until the ejectors lock it into place . (Figure 6) W arning: The memory is designed to fit into the slot only one way.
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 7 Closing the User Access Door 1. Replace the screw on the user access panel. (Figure 7) Figure 7 2. Carefully turn the computer r ight side up .
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 8 Apple Computer , Inc. © 2004 Apple Computer , Inc. All rights reser ved. Under the cop yright laws, this document ma y not be copied, in whole or is par t, without the written consent of Apple. The Apple logo is a trademark of Apple Computer , Inc.
An important point after buying a device Apple ATI Graphics (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apple ATI Graphics yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apple ATI Graphics - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apple ATI Graphics you will learn all the available features of the product, as well as information on its operation. The information that you get Apple ATI Graphics will certainly help you make a decision on the purchase.
If you already are a holder of Apple ATI Graphics, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apple ATI Graphics.
However, one of the most important roles played by the user manual is to help in solving problems with Apple ATI Graphics. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apple ATI Graphics along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
