Instruction/ maintenance manual of the product 4107 CC ABC Office
Go to page of 17
1 IDEAL 4107 IDEAL 4107 CC IDEAL 4109 IDEAL 4109 CC Operating Instructions.
2 IDEAL 4107; IDEAL 4109 1-800-658-8788 - www.abcoffice.com.
3 T able of content s 1. General ........................................................ 4 1. 1 Safety Instructions ....................................... 4 1.2 Application ................................................... 4 2. Installation ......
4 IDEAL 4107; IDEAL 4109 1. General This instruction manual will help you to learn the safe and comfortable operation of this machine. Please carefully read and observe the operating instructions and safety instructions. This information applies to both models when no reference is made.
5 2. Inst allation The machine is mobile on castors. The machine must be installed on a sturdy , dry , and level floor . Oil level must be visible in the sight glass (2) IDEAL 4109 version. Danger! - The machine may not be installed outside. - Do not use in the vicinity of flammable liquids or gases.
6 IDEAL 4107; IDEAL 4109 2.2 Power supply The name plate is located at the rear of the machine. - Data stated on the name plate - V oltage “ V “, - Frequency “Hz”, - Power consumption “A” must correspond to the values of the power supply unit.
7 3. Operation Danger! The machine may only be operated by persons who have read and understood the operating instructions. Danger! Do not reach into the running shredding mechanism! The shredding mechanism may cause serious injury! Danger! The machine will only run when the door is closed.
8 IDEAL 4107; IDEAL 4109 Machine stops due to overloading - Remove any paper left on the conveyor belt. Do not reach behind the flap. - Press and release the yellow key (3) Conveyor belt reverses. - Feed less paper onto the conveyor belt. - S tart afresh.
9 3.5 Oiling the shredding mechanism If the sheet capacity reduces or after “bag full“ we recommend that you oil the shredding mechanism. - Press the oilpump button 3 x. - After lubrication let the machine run several times backwards and forwards alternately .
10 IDEAL 4107; IDEAL 4109 3.7 Operation of baler (IDEAL 4109) Eject bale when the white control lamp shows Danger! Do not stand behind the bale ejecting guard during baling. Danger of being crushed. Bale ejection - Release safety slide (1). (Pull backwards and turn to the right).
11 - Hold bale ejecting guard (2) with the left hand and swing locking mechanism (4) with the right hand into vertical positon . . . . . . until securing bushing (5) locks into position. - Swing down bale ejecting guard (2). - Press green button (6) until the pump motor switches off.
12 IDEAL 4107; IDEAL 4109 - While removing the plastic bag push down the remaining paper . - Place pressed bale on the floor . Danger! Do not reach into the hopper . Danger of getting cut! - T ie bales or seal with locking device. (for sealing parts and binding wires see accessories).
13 Close bale - Push up locking bush (5) and swing down locking mechanism (4). - Slightly open the bale ejecting guard (2) with both hands until the lug (14) is above the locking catch (15).
14 IDEAL 4107; IDEAL 4109 - Important! Lock safety slide (1). (Pull back and turn up.). 3.8 Premature ejecting of bale (IDEAL 4109) - Push knob (16) with pen or similar .
15 4. T rouble-shooting Danger! Disconnect from the mains before starting any service work or before removing the cover . Malfunction: S tandby (5) is not lighting up / machine does not start.
16 IDEAL 4107; IDEAL 4109 5. Accessories Plastic bags 350 l (50 pieces) 9000412 Cutting head oil 10 x 0,2 l 9000610 For fastening plastic bags: Wire twisting tool for one-way plastic bags 9000591 Wire ties for one-way plastic bags (1000 pieces) 9000592 Attention! Only use manufacturer recommended accessories.
17 EG-KONFORMIT Ä TSERKL Ä RUNG EC-declaration of conformity D é claration de conformit é CE Declaraci ó n CE de conformidad Dichiarazione CE di conformit à EG-verklaring v an overeenstemming De.
An important point after buying a device ABC Office 4107 CC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ABC Office 4107 CC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ABC Office 4107 CC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ABC Office 4107 CC you will learn all the available features of the product, as well as information on its operation. The information that you get ABC Office 4107 CC will certainly help you make a decision on the purchase.
If you already are a holder of ABC Office 4107 CC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ABC Office 4107 CC.
However, one of the most important roles played by the user manual is to help in solving problems with ABC Office 4107 CC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ABC Office 4107 CC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
