Instruction/ maintenance manual of the product 60PM970T LG
Go to page of 42
User ’ s Guide Specication Creator Adviser Approver In charger DD/MM/YY Woo Mi-ra 22/03/12 Shin Hye-jung 22/03/12 Kim Jong-ok 22/03/12 1. Model Description 2.
Pagination sheet T otal pages : 40 pages Front Cover (ENG) P/No. 2 ... ... ... ... Blank Back Cover (ENG).
O WNER’S MANU AL PLA SMA T V Please r ead this manual carefully bef ore operating your se t and re tain it f or futur e r ef erence. P /NO : MFL673 7780 1 ( 1203-REV01) Printed in K orea www .
2 ENG ENGLISH T ABLE OF CONTENTS T ABLE OF CONTENTS 3 LICENSES 3 OPEN SOURCE SOFTW ARE NOTICE 4 SAFETY INSTRUCTIONS 10 - Viewing 3D Imaging (Only 3D models) 12 INST ALLA TION PROCEDURE 12 ASSEMBLING A.
3 ENG ENGLISH LICENSES / OPEN SOURCE SOFTW ARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit www .lg.com . Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
4 ENG ENGLISH SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product. W ARNING y Do not place the TV and remote control in the following enviro.
5 ENG ENGLISH SAFETY INSTRUCTIONS y Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating. y Do not drop the product or let it fall over when connecting external devices.
6 ENG ENGLISH SAFETY INSTRUCTIONS y Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur . Contact the service center for check, calibration or repair . y If any of the following occur , unplug the product immediately and contact your local service centre.
7 ENG ENGLISH SAFETY INSTRUCTIONS CAUTION y Install the product where no radio wave occurs. y There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock.
8 ENG ENGLISH SAFETY INSTRUCTIONS y Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. y Please follow the installation instructions below to prevent the product from overheating.
9 ENG ENGLISH SAFETY INSTRUCTIONS y When moving or unpacking the product, work in pairs because the product is heavy . Otherwise, this may result in injury . y Contact the service center once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure.
10 ENG ENGLISH SAFETY INSTRUCTIONS Viewing 3D Imaging (Only 3D models) W ARNING Viewing Environment y Viewing T ime - When watching 3D contents, take 5 - 15 minute breaks every hour . Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.
1 1 ENG ENGLISH SAFETY INSTRUCTIONS CAUTION Viewing Environment y Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV .
12 ENG ENGLISH INST ALLA TION PROCEDURE / ASSEMBLING AND PREP ARING NOTE y Image shown may differ from your TV . y Y our TV’s OSD (On Screen Display) may dif fer slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using.
13 ENG ENGLISH ASSEMBLING AND PREP ARING FREEZE RATIO L/R SELECT ENTER BACK EXIT Q.MENU INFO MENU CH VOL P A G E FAV 3D MUTE 1 2 3 4 5 6 7 8 0 9 MARK LIST FLASHBK ENERGY SAVING TV AV MODE INPUT Remote Control, Batteries (AAA) ( See p. 29 ) Magic Remote Control, Batteries (AA) (Only 50/60PM 97 ** ) ( See p.
14 ENG ENGLISH ASSEMBLING AND PREP ARING NOTE 2 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug. 4 Use the ferrite core to reduce the electromagnetic interference in the component Y , Pb, Pr , L, R cable.
15 ENG ENGLISH ASSEMBLING AND PREP ARING Separate purchase Separate purchase items can be changed or modied for quality improvement without any notication.
16 ENG ENGLISH ASSEMBLING AND PREP ARING Parts and buttons 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Antenna cable socket - The Antenna cable socket may differ from the model. Button Description / I T urns the power on or off.
17 ENG ENGLISH ASSEMBLING AND PREP ARING Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen.
18 ENG ENGLISH ASSEMBLING AND PREP ARING Setting up the TV Image shown may differ from your TV . Attaching the stand 42/50PM47**, 50/60PM67** 1 1 2 3 50/60PM68**, 50/60PM97** M5 x 16 3EA Stand Base St.
19 ENG ENGLISH ASSEMBLING AND PREP ARING CAUTION y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. y Make sure that the screws are fastened completely . (If they are not fastened securely enough, the TV may tilt forward after being installed.
20 ENG ENGLISH ASSEMBLING AND PREP ARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the power cord to a wall outlet. CAUTION y Do not place the TV near or on sources of heat, as this may result in fire or other damage.
21 ENG ENGLISH ASSEMBLING AND PREP ARING CAUTION y Disconnect the power first, and then move or install the TV . Otherwise electric shock may occur . y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury . Use an authorised LG wall mount and contact the local dealer or qualified personnel.
22 ENG ENGLISH ASSEMBLING AND PREP ARING T idying cables 1 Install the Power Cord Holder and Power Cord. It will help prevent the power cable from being removed by accident. 2 Gather and bind the cables with the Cable Holder . Install the LAN Cable as shown to reduce the electromagnetic wave.
23 ENG ENGLISH MAKING CONNECTIONS MAKING CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the PM97** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
24 ENG ENGLISH MAKING CONNECTIONS HDMI Connection T ransmits the digital video and audio signals from an external device to the TV . Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. It does not matter which port you use.
25 ENG ENGLISH MAKING CONNECTIONS RGB-PC Connection T ransmits the video signal from PC to the TV . T o transmit an audio signal, connect an audio cable. DVI to HDMI Connection T ransmits the digital video signal from an external device to the TV . Connect the external device and the TV with the DVI-HDMI cable as shown.
26 ENG ENGLISH MAKING CONNECTIONS Component Connection T ransmits analog video and audio signals from an external device to the TV . Connect the external device and the TV with a component cable as shown. NOTE y If cables are installed incorrectly , it could case the image to display in black and white or with distorted colour .
27 ENG ENGLISH MAKING CONNECTIONS USB Connection Connect a USB storage device such as a USB ash memory , external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia les. NOTE y T o use a USB Hub device, make sure that it is connected to the USB Hub port.
28 ENG ENGLISH MAKING CONNECTIONS CI module Connection View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. NOTE y Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly , this can cause damage to the TV and the PCMCIA card slot.
29 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly . T o replace batteries, open the battery cover , replace batteries (1.
30 ENG ENGLISH MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS This item is not included for all models. When the message “Magic Remote Control battery is low . Change the battery .” is displayed, replace the battery . T o replace batteries, open the battery cover , replace batteries (1.
31 ENG ENGLISH MAGIC REMOTE CONTROL FUNCTIONS How to use Magic Remote Control 1 If the pointer disappears, move the remote control slightly to left or right. Then, it will automatically appear on the screen. » If the pointer has not been used for a certain period of time, it will disappear .
32 ENG ENGLISH USING THE USER GUIDE 1 Press the HOME button t o access the HOME menu. 2 Select User Guide and press Wheel(OK) . Input List Settings Live TV Search Internet 3D LG Smart W TV Guide User Guide Recent List User Guide NOTE y Y ou can also access the User Guide by pressing ( User Guide ) in the remote control.
33 ENG ENGLISH MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first.
34 ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP / SPECIFICA TIONS EXTERNAL CONTROL DEVICE SETUP T o obtain the external control device setup information, please visit www .lg.com SPECIFICA TIONS Product specications may be changed without prior notice due to upgrade of product functions.
35 ENG ENGLISH SPECIFICA TIONS Product specications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product.
36 ENG ENGLISH SPECIFICA TIONS Satellite Digital TV 1 Digital TV 2 Digital TV Analogue TV T elevision system DVB-T DVB-C DVB-S/S2 DVB-T/T2 DVB-C DVB-T DVB-C P AL/SECAM B/G/D/K, SECAM L/L ’ Programme.
37 ENG ENGLISH SPECIFICA TIONS 3D supported mode Input Signal Resolution Horizontal Frequency (kHz) V ertical Frequency (Hz) Playable 3D video format HDMI 480p 640X480 62.938 / 63 59.94/ 60 Frame packing, Line alternative 720X480 640X480 31.469 / 31.5 Side-by-side(Full), T op-and-Bottom, Side-by-side(half) 720X480 576p 720X576 62.
.
.
T rade Mark of the DVB Digital Video Broadcasting Pr oject (1991 to 19 96) R ecord the model number and serial number of the T V . R efer t o the label on the back cover and quot e this inf ormation to y our dealer when r equiring any ser vice. MODEL SERIAL Please contact L G First .
An important point after buying a device LG 60PM970T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG 60PM970T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG 60PM970T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG 60PM970T you will learn all the available features of the product, as well as information on its operation. The information that you get LG 60PM970T will certainly help you make a decision on the purchase.
If you already are a holder of LG 60PM970T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG 60PM970T.
However, one of the most important roles played by the user manual is to help in solving problems with LG 60PM970T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG 60PM970T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
