Instruction/ maintenance manual of the product X560 Lexmark
Go to page of 12
Lexmark™ X560 Clearing Jams Guide Avoiding and clearing jams Avoiding jams The following hints can help you avoid jams: • Use only recommended paper or specialty media. For more information, see the Card Stock & Label Guide available on the Lexmark Web site at www.
3 Remove any jammed paper from inside the printer. 4 Close the front door. 2.
5 Grasp the handle, and pull Tray 1 out. Remove the tray completely. 6 Remove any jammed paper from inside the tray housing. 7 Align the tray, and insert it. Clearing Tray 2 jams If the paper did not feed from Tray 2 correctly, the jam is in the tray.
2 Remove the jam. The jam could be in the tray or behind the tray area. • Jams in the tray —Locate the single piece of paper lying on top of the stack. Pull it straight out. • Jams behind the tray area —Locate the jam on the bottom surface of the tray housing.
5 Remove any jammed paper from inside the printer. 6 Close the front door. Clearing Tray 3 jams If the paper did not feed from Tray 3 correctly, the jam is in the tray. Jam at Tray 3 appears. 1 Grasp the handle, and pull Tray 3 out. Remove the tray completely.
• Jams behind the tray area —Locate the jam on the bottom surface of the tray housing. You may have to reach far under the printer to locate the jam, as shown in the following illustration. Pull the jam straight out. 3 Align the tray, and insert it.
6 Close the front door. Clearing jams in the fuser If the paper is jammed in the fuser area, Jam at Exit or Jam at Reg. Roll appears. A Jam at Reg. Roll message indicates the paper is jammed below the fuser. A Jam at Exit message indicates the paper is jammed above the fuser.
3 Lift the fuser cover, and then remove the jammed paper. 4 Close the fuser cover, and then lower the pressure release levers. 5 Close the front door. 8.
Clearing jams in the duplex unit If the paper did not feed through the duplex unit correctly, the jam is in the duplex paper path. Jam at Duplexer appears. CAUTION—HOT SURFACE: To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
5 Close the transfer belt unit. 6 Close the front door. Clearing jams in the ADF If the paper is jammed in the ADF, Jam at Scanner appears. Remove all jammed paper, and make sure the paper feed tray is not overfull. 1 Remove all paper from the paper feed tray, and then open the ADF cover.
2 If the jam is in the paper feed area, remove the jam by carefully pulling it up. 3 If the jam is at the paper exit area, turn the dial to remove the jam. 4 Close the ADF cover. 5 Open the scanner cover and remove any jammed paper from the paper feed area.
6 Close the scanner cover. 7 When all the jammed paper is removed, Return the Removed Original and Press Start appears. Place the original document in the ADF, and then press Start to continue with the scan job.
An important point after buying a device Lexmark X560 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lexmark X560 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lexmark X560 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lexmark X560 you will learn all the available features of the product, as well as information on its operation. The information that you get Lexmark X560 will certainly help you make a decision on the purchase.
If you already are a holder of Lexmark X560, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lexmark X560.
However, one of the most important roles played by the user manual is to help in solving problems with Lexmark X560. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lexmark X560 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
