Instruction/ maintenance manual of the product X203N Lexmark
Go to page of 15
Quick Reference.
Contents Loading paper and specialty media ...............................................3 Loading the paper tray ........................................................................................................................................
Loading paper and specialty media Loading the paper tray Do not load the paper tray while a job prints or while Busy appears on the display. Doing so may cause a paper jam. 1 Pull the paper tray completely out. 2 Squeeze the width guide tabs on the right guide as shown, and slide the width guides to the sides of the tray.
3 Squeeze the length guide tabs together as shown, and then slide the length guide to the correct position for the paper size. Use the size indicators on the bottom of the tray to help position the guide.
5 Load the paper stack toward the back of the tray as shown with the recommended print side facedown. Note: The maximum fill line on the side of the width guide indicates the maximum height for loading paper. Do not overload the tray. Load letterhead with the print side facedown and the top edge of the sheet toward the front of the tray.
7 Insert the paper tray. 8 If the paper type you loaded differs from the type that was previously loaded in the tray, then change the Paper Type setting for the tray.
Clearing jams 200–201 paper jam 200 paper jam 1 Remove the tray from the printer. Clearing jams 7.
2 Remove the jam if you see it here. 3 If you do not see it, see “201 paper jam” on page 8. 201 paper jam 1 Open the front door, and then remove the photoconductor kit and toner cartridge.
2 Lift the flap at the front of the printer, and remove any jammed sheets. 3 Align and insert the photoconductor kit and toner cartridge. 4 Close the front door.
202 paper jam CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 1 Open the front door, and then remove the photoconductor kit and toner cartridge.
2 Lift the flap at the front of the printer, and then remove any jammed sheets. Clearing jams 11.
3 Open the rear door. 4 Remove the jam. 5 Close the rear door. 6 Align and insert the photoconductor kit and toner cartridge. 7 Close the front door. 8 Press .
241 paper jam 1 Remove the tray from the printer. 2 Remove the jam. 3 Insert the tray. 4 Press . Clearing jams 13.
251 paper jam A sheet of paper or specialty media failed to feed completely from the manual feeder. Part of it may be still visible. If it is visible, then gently pull the jammed sheet from the front of the manual feeder. If the sheet is not visible, then complete the following steps: 1 Remove the photoconductor kit and toner cartridge.
2 Lift the flap at the front of the printer, and then remove any jammed sheets. 3 Align and insert the photoconductor kit and toner cartridge. 4 Press .
An important point after buying a device Lexmark X203N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lexmark X203N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lexmark X203N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lexmark X203N you will learn all the available features of the product, as well as information on its operation. The information that you get Lexmark X203N will certainly help you make a decision on the purchase.
If you already are a holder of Lexmark X203N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lexmark X203N.
However, one of the most important roles played by the user manual is to help in solving problems with Lexmark X203N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lexmark X203N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
