Instruction/ maintenance manual of the product ATX-B4KLW Apevia
Go to page of 6
ATXB4KLW(X-Dreamer II) Series Installation Guide 1:Unscrew the thumb screws 2.Pull the side panel back then 3:Fi nd the motherboard stand-offs from side panel. pull out. from the enclosed screw box. 4:Put the motherboard stand-offs 5.Sit the motherboard on the 6.
9.Take out front panel : Step (1): Unscrew the side Step (2): Take ou t the side Step (3): There are 4 screws that panel (motherboard side) panel (motherboard side) hold the front panel to the case. (2 on each side) Unscrew the 2 screws from inside of the case.
13.Secure the 5.25” drives 14. Slide in 3.5” FDD Drive and 15.In stall 3.5” hidden drives such in place with screws. secure with screws. as hard drive, zip drive. 16.Screw all 3.5” hidden drives 17. Snap in the front panel and 18.Audi o Cable: Take out the I/O slot in place with screws.
22.Find the 4pin connectors 23.Find the 20-pin connector 24.Plug into your motherboard. (Female and Male) from case from power su pply. Different M/B has different layout. Fan. Connect the Male to the Please refer to your motherboard Female 4pin from power supply.
31.Find “Power SW”, “+P LED” 33.Find “Case Spea ker” from 34.Install case speaker to M/B & “-P LED” cables and plug onto screw box. following M/B user manual M/B. Please refer to M/B user manual. 35.Install LED Lights: Find 2*LED 36.
40.You can either tape the sensor on Hard Drive or on CPU Heat 41.This is how the case front panel sink or leave it inside the case to get the over all system temperature. l ooks like after powered on. 42.Find “Case Feet” in screw box. Lay case down and put “Case Feet” on.
An important point after buying a device Apevia ATX-B4KLW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apevia ATX-B4KLW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apevia ATX-B4KLW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apevia ATX-B4KLW you will learn all the available features of the product, as well as information on its operation. The information that you get Apevia ATX-B4KLW will certainly help you make a decision on the purchase.
If you already are a holder of Apevia ATX-B4KLW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apevia ATX-B4KLW.
However, one of the most important roles played by the user manual is to help in solving problems with Apevia ATX-B4KLW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apevia ATX-B4KLW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
