Instruction/ maintenance manual of the product 34S0700 Lexmark
Go to page of 10
Lexmark E460dn, E460dw, and E462dtn Maintenance Guide January 2010 www.lexmark.com.
Contents Maintaining the printer ................................................................................3 Cleaning the exterior of the printer ...................................................................................................
Maintaining the printer Periodically, certain tasks are required to maintain optimum print quality. Cleaning the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet.
Ordering supplies To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.
Part name Lexmark Return Program Cartridge Regular cartridge Extra High Yield Toner Cartridge E462U11L E462U21G Ordering a photoconductor kit The printer issues a message to let you know the photoconductor kit is near its end of life. At this time, order a photoconductor kit.
To replace the toner cartridge: 1 Open the front door by pressing the button on the left side of the printer and lowering the door. 2 Press the button on the base of the photoconductor kit, and then pull the toner cartridge out using the handle. 3 Unpack the new toner cartridge.
5 Install the new toner cartridge by aligning the rollers on the toner cartridge with the arrows on the tracks of the photoconductor kit. Push the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed. 6 Close the front door.
Place the unit on a flat, clean surface. 4 Press the button on the base of the photoconductor kit. Pull the toner cartridge up and out using the handle. 5 Unpack the new photoconductor kit. Warning—Potential Damage: Be careful not to touch the photoconductor drum.
6 Insert the toner cartridge into the photoconductor kit by aligning the rollers on the toner cartridge with the tracks. Push the toner cartridge until it clicks into place. 7 Install the unit into the printer by aligning the arrows on the guides of the unit with the arrows in the printer.
Moving the printer Moving the printer to another location CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.
An important point after buying a device Lexmark 34S0700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lexmark 34S0700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lexmark 34S0700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lexmark 34S0700 you will learn all the available features of the product, as well as information on its operation. The information that you get Lexmark 34S0700 will certainly help you make a decision on the purchase.
If you already are a holder of Lexmark 34S0700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lexmark 34S0700.
However, one of the most important roles played by the user manual is to help in solving problems with Lexmark 34S0700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lexmark 34S0700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
