Instruction/ maintenance manual of the product RZCP Leviton
Go to page of 2
Plug-In Serial Interface Module Cat. No. RZC Ø P Rated: 120V AC, 60Hz INST ALLA TION INSTRUCTIONS DI-000-RZC0P-00C INTRODUCTION Leviton’s V izia TM RF components are designed to communicate with each other via Radio Frequency (RF) to provide remote control of your lighting.
LIMITED 5 YEAR W ARRANTY AND EXCLUSIONS Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the purchase date.
An important point after buying a device Leviton RZCP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Leviton RZCP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Leviton RZCP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Leviton RZCP you will learn all the available features of the product, as well as information on its operation. The information that you get Leviton RZCP will certainly help you make a decision on the purchase.
If you already are a holder of Leviton RZCP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Leviton RZCP.
However, one of the most important roles played by the user manual is to help in solving problems with Leviton RZCP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Leviton RZCP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
