Instruction/ maintenance manual of the product ViewCon KVM-0407 LevelOne
Go to page of 19
- 1 - LevelOne KVM-0407 4-Port USB KVM Switch with USB Hub User ’ s Guide V ersion 1.0-0602.
- 2 - Index 1. INTRODUCTION…………….…… ……………….…….……………………3 1.1 F EA TURES ……………………………………………..…...………………….… 3 1.2 P HYSICAL D IAGRAM …………………………………….
- 3 - 1. Introduction Thank you for purchasing KVM-0407 4-Port USB KVM Switch Hub ! Y ou now have a high quality and durability system that can give you the contro l over multiple computers/servers from one c onsole (PS2/USB Mouse, Keyboard and Monitor).
- 4 - 1.2 Physical Diagram 1.3 Package Contents The product you purchased should contain the equipm ent and accessories shown as follows: 1. A KVM-0407 4-Port USB KVM Switch Hub. 2. CD with users manual, On-Screen-Display(OSD) utility. 3. Four sets of USB+VGA cables.
- 5 - 2. Specifications 2.1 General Specification Operating T emperature 5~ 40 ° C Humidity 0%~80%RH Cables Included 4 Cable Length 1.8M Dimensions (LxWxH) 200 x 82 x 44mm Unit W eight 721g Number Of.
- 6 - 2.2 LED Indicators Power status LED indicator: On (Green): The power is connected and the device is ready to work. Off: No power is connected. HUB POWER LED In dicator: ON (Green): USB ports are ready to work. Off: USB ports are in over -current c ondition or are not ready to work.
- 7 - 3. Installing KVM-0407 3.1 System Requirements A PC with 1 spare USB port and 1 VGA port. W indows 98 or later , Mac OS9/OSX, Solaris 8 (SUN BLADE 100), Linux Kernel 2.3 or later . 3.2 Hardware Installation 1. Make sure that the USB port of host PC is enabled and working properly .
- 8 - F i g . A F i g . B F i g . C A. Press “Next” to Continue. (Ref. Fig. A) B. T ick “Search for the best driver for your device” and p ress “Next” to continue. (Ref. Fig. B). C. Please insert the “W indows 98” CD into your CD-ROM drive.
- 9 - F i g . D F i g . D 1 * The driver m ight be located in a diff erent directory from the figure above. D. Press “Next” to start the installation process.
- 10 - F i g . D 2 F i g . E 3.6 Using the OSD program Fig. F D2. Press “OK” to continue (Ref. Fig. D2) E. Press “Finish” and W indows has finished installing the USB Human Interface Device driver for PS/2 keyboard & mouse.
- 11 - There ar e four differ ent statuses: a. “No PCs Found” means that KVM-0407 ca nnot acquire the PC status. This is either the PC did not connect or is powered of f.
- 12 - F i g . J 1. W hen user click “Hide” button, OSD program window will hide in T askbar . 2. W hen user click “Close” button, OSD program will exit. 3. If OSD program hide in T askbar , user can use mouse right button to show or exit program.
- 13 - 4. Switching KVM-0407 KVM-0407 supports 3 methods to switch between computers: Push button , Hot Keys and OSD . Due to refresh of the video and re-synchronization of the mouse and keyboard signal, it will take 1-3 sec onds conf igure time after each switching.
- 14 - *After invo king the Hot Key function with the you must key in the corresponding active key (S tep 2) within 3 seconds for each key pr ess. ( The Scroll LED will st art blinking and wait for the Step 2 hotkey , af ter pressing any key or over 3 seconds , the keyboard LED will back to the original status.
- 15 - * Auto-Switc h Function: When Auto-Switch mode is ON: When you enable the AutoSwitch mode will caus e KVM-0407 to switch the HUB with the host together when you switch the host, that m eans host and HUB will switch together , it could be by hotkey , pus h button.
- 16 - Auto-Scan Interval timer [n] *(A vailable only when Auto-Scan function is ON) Y ou can change the Auto-Scan interval by pressing the appropriate number key or the number pad keys. n Scan Interval [1] 5 sec. [2] 10 sec. [3] 15 sec. [4] 20sec. [5] 25sec.
- 17 - * Sun Micr o System Function Key Emulation: There are 16 special functions on th e Sun Micro system keyboard, KVM-0407 can emulate these function keys via the PS/2 keyboard ( it won’ t work on the USB keyboard ). Here is the mapping ta ble for these functions operation.
- 18 - * T r oubleshooting If your USB keyboard and mouse connect ed on KVM-0407 could not work at the W indows login screen, it may be caused because the HID driver has not been installed, please follow these step s to solve this problem : 1. Shut down the host PC.
- 19 - Disclaimer Information in this docum ent is subject to change without no tice. The manufacturer does not make any representations or warranties (implied or otherwise) reg arding the accuracy an.
An important point after buying a device LevelOne ViewCon KVM-0407 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LevelOne ViewCon KVM-0407 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LevelOne ViewCon KVM-0407 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LevelOne ViewCon KVM-0407 you will learn all the available features of the product, as well as information on its operation. The information that you get LevelOne ViewCon KVM-0407 will certainly help you make a decision on the purchase.
If you already are a holder of LevelOne ViewCon KVM-0407, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LevelOne ViewCon KVM-0407.
However, one of the most important roles played by the user manual is to help in solving problems with LevelOne ViewCon KVM-0407. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LevelOne ViewCon KVM-0407 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
