Instruction/ maintenance manual of the product GNC-0102T LevelOne
Go to page of 15
LevelOne GNC - 0102T 64 - bit PCI 10/100/1000Mbps Gigabit Ethernet Adapter User’s Guide.
FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limit s are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
T ABLE OF C ONTENTS INTRODUCTION ......................................................................... 1 F EATURES ................................................................................................. 1 G IGABIT E THERNET T ECHNOLOGY .
.
1 I NTRODUCTION Thank you for choosing the LevelOne GNC - 0101T 64bit 10/100 /1000Mbps Gigabit Ethernet Adapter for 32/64 - bit PCI Bus - equipped personal computers.
2 u 802.3x Full duplex flow control, including automatic transmission of Pause f rames based on Rx FIFO thresholds u 802.1D and 802.1Q priority queuing support. Supports multiple priority queues in both transmit and receive directions. u Six LED indicators for easy diagnostic Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.
3 data - intensive applications. Likewise, since data transfers occur 10 times faster than Fast Ethernet, servers outfitted with Gigabit Ethernet NIC’s are able to perform 10 times the number of operations in the same amount of time.
.
5 U NPACKING AND I NSTALLATION This chapter provides unpacking and inst allation information for the LevelOne GNC - 0101T 64bit 10/100 /1000Mbps Gigabit Ethernet Adapter .
6 Installing the Gigabit Ethernet Card 1. Shut down th e computer, unplugs its power cord, and remove the chassis cover. 2. Insert the contact edge of the Gigabit Ethernet card into the connector of any available PCI Bus Master expansion slot.
7 Connecting the Network Cable Four pair of Cat.5 UTP or STP ca ble with RJ - 45 connector is required for the LevelOne GNC - 0101T 64bit 10/100 /1000Mbps Gigabit Ethernet Adapter .
.
9 LED I NDICATORS 1000Mbps Gigabit Ethernet Link (1000) This indi cator lights green when the Gigabit Card is connects to 1000Mbps Gigabit Ethernet Network. 100Mbps Fast Ethernet Link (100) This indicator lights green when the Gigabit Card is connects to 100Mbps Fast Ethernet Network.
.
11 T ECHNICAL S PECIFICATIONS General Standards IEEE 802.3 10Base - T Ethernet IEEE 802.3u 100Base - TX Fast Ethernet IEEE 802.3z 1000Base - T Gigabit Ethernet IEEE 802.3u Auto - Negotiation and Parallel Detection IEEE 802.3x Flow Control IEEE 802.1D & 802.
An important point after buying a device LevelOne GNC-0102T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LevelOne GNC-0102T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LevelOne GNC-0102T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LevelOne GNC-0102T you will learn all the available features of the product, as well as information on its operation. The information that you get LevelOne GNC-0102T will certainly help you make a decision on the purchase.
If you already are a holder of LevelOne GNC-0102T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LevelOne GNC-0102T.
However, one of the most important roles played by the user manual is to help in solving problems with LevelOne GNC-0102T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LevelOne GNC-0102T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center