Instruction/ maintenance manual of the product DSA-1000 LevelOne
Go to page of 21
LevelOne DS A - 1000 / PRT - 1000 Device Server / Thermal Printer User Manual V1.0.
T ABLE OF C ONTENTS 1. INTRODUCT ION ...................................................................................................................................................................... - 3 - 2. DEVICE OVER VIEW .....................
- 3 - 1. Introduction Overvie w of Network Ticket Genera tor Whether you are “ operating a wireless hotspot servi ce for generating reven ue” or “ providing free but controlled wireless in terne.
- 4 - Below are two netw ork diagrams ex amples using Netw ork Ticket Gene rator combo set. 1) One Gatew ay with one Netw ork Ticket Generator set 2) One Gatew ay with multipl e Network Ticket-Generat.
- 5 - W HG- 1000 DSA-1000 DSA-1000 RS232 Cable RS232 Cable Ethernet Cable Ethernet Cable PRT- 1000 PRT- 1000.
- 6 - A pplicati on Diagra m Though DSA - 1000 is speci fically designed to for on-demand account gen eration and operate Ther mal Printers, it can al so be deploy ed independently to connect other RS23 2 devices to an E the rnet netw ork for remote operation.
- 7 - 2. Device Overview Panel Overv iew Top Panel Adapter Socket (12V/1A) The power sock et for connecting to an external power source throu gh the po wer adapter provided in the package. DC Socket (DC12V) The power sock et for connecting to an external power source throu gh a DC power su pply.
- 8 - Bottom Panel COM 1 Serial Port for conn ection with a Therm al Printer. COM 2 Serial Port for conn ection with a Therm al Printer . Used for back up when COM 1 m alf unctions. Main Panel LED indicators Power Turned on when prop erl y connect to power suppl y.
- 9 - For switching the outp ut to COM1 or COM2. Press this button follo wed by selecting a num ber and press Enter will perform a specific action. The available com binations are as f ollows: FUNTION + 1 + ENT ER: Print out the I P addres s of DSA-1000.
- 10 - 3. Hardware Setup The follow ing diagram illustrates how to connect DSA - 1000 to the Therma l Printer and Gat e- ways/Controll ers. Please follow the steps describ ed below to install hardw are: 1. Attach DSA - 1000 to a power source, either through adapto rs provide d in the package or th rough DC socket wi th a DC power suppl y.
- 11 - Note: If you are unable to get a reply from pinging DSA-1000, please refer to Sy s- tem Configuration and check that the network settings of DSA- 1000 and Gateway/Controller interface connected to are under the same subn et.
- 12 - 4. System Configuration DSA - 1000 is designed specifically to operate in con junction with all Gateways/Controllers. If you are not using default set tings, before connectin g DSA -1000 to your Gatew ay/Controller, some configuratio ns steps are required.
- 13 - Step2: Attach DSA - 1000 to a pow er supply using the ada pter provided in the package. Connect the administrator PC to the Etherne t Port o f DSA - 1000 via an Ethernet cable. Launch a w eb browser and type in the de fault IP address of DSA - 1000 in the add ress field ( http://192.
- 14 - 4.2 Gate w ay /Controller Configuration p rocedures are similar on all Gatew ay/Controller models, t he followi ng instru ction steps uses W HG -1000 as illustration . Note: the screen shots may be sli ghtly different for your Gat eway /Controller model.
- 15 - Step2: Enter the con figuration page o f the Service Zone w hich DSA - 1000 will be conne cted to. Check to make sure that the netw ork settings of DSA - 1000 are u nder the same subnet as this service z one. Step3: Go to the con figuration page for On- demand authentication; click Conf igure to edit Terminal Server se t- tings.
- 16 - Step4: Edit and enable de sired billing plans..
- 17 - 5. Operation Instructions After completin g the Hardw are Setup and the dev ices are phy sically connected, the system is ready for operation. This sec tion will describe how to operate DSA - 1000 to printout ti ckets for enabled bil ling plans.
Appendix A. DS A- 1000 Web Int erface Sum mary The attribute se tting in this w eb interface is for C OM 1 only. COM 2 uses default setti ngs that are un cha n- geable. Serial Settings (corresponding t o T hermal Printer) Data Baud Rate Select the desired bau d rate.
Appendix E - Command Line Interface 19 Network Settings Static IP A d- dress The static IP address a ssig ned to DSA- 1000 . Static Subnet Mask The subnet m ask of DSA-1 000. Static Default Gateway The default gatewa y of DSA-100 0. Static DNS Server Set the DNS server use d by D SA-1000.
Appendix E - Command Line Interface 20 Appendix B. Firmware Upgrade Software tools tftpd32 is required in the upgrade procedure, please dow nload and install tftpd32 be fore you proceed further. Note: Tftpd32 can be dow nloaded from the following link: http://tftpd32.
Appendix E - Command Line Interface 21 Step4: Click App ly of Firm ware Upgrade in DS A- 1000 ’s web interface. DSA - 1000 will automatical ly res- tart and connec t to tftpd32 server set in Step3 as a DH CP client, downl oad the firmware and pe rform the upgrade.
An important point after buying a device LevelOne DSA-1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LevelOne DSA-1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LevelOne DSA-1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LevelOne DSA-1000 you will learn all the available features of the product, as well as information on its operation. The information that you get LevelOne DSA-1000 will certainly help you make a decision on the purchase.
If you already are a holder of LevelOne DSA-1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LevelOne DSA-1000.
However, one of the most important roles played by the user manual is to help in solving problems with LevelOne DSA-1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LevelOne DSA-1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
