Instruction/ maintenance manual of the product H-4 DC A Leupold
Go to page of 11
Instruction Manual H-4 DC A BAL H-4 DC A 4spr. DIN A 6 22.02.2002 11:07 Uhr Seite 1.
Contents 1. Introduction 2. Safety information 3. Faults and damage 4. Safety regulations 5. Ex-Data 6. T echnical data 7. Operating instructions 8. Repairs 9. Cleaning 10. Guarantee and liability 11. EC-Declaration of conformity 12. EC-Certificate of conformity Page 12 12 12 13 13 14 14 - 15 15 15 16 17 18 - 19 .
1. Introduction Providing an intense bright inspection light beam, the intrinsically safe rechargeable handlamp type H-4 DC A is certified for use in Ex-hazardous areas classified as either Zone 1 or 2 and also Zone 21 or 22 according to IEC/CENELEC. 2.
4. Safety regulations The use of the intrinsically safe H-4 DC A meets the requirements of the regulations providing that the user observes and applies the requirements as laid down in the regulations and that improper and incorrect use of the unit is avoided.
6. T echnical Data Working temperature T a: -20 ... +40°C Storage temperature: -20 ... +40°C Operating time: 20 hours Dimensions: 190 x 130 (L x diameter) Weight: approx. 1400 g (with batteries) IP-Rating: IP 66 CE-marking: 0102 Power supply: 4 x LR20/R20 Bulb: Halogen 4,8 V olt and 0,5 Ampere, T ype H-141 7.
can be difficult to start. T o replace the handlamp head, reverse the procedure – ensuring that the handlamp head is screwed fully closed. 7.4. Bulb replacement With the handlamp head removed the bulb is accessed by unscre- wing - in an anticlockwise direction - the bulb retention socket.
10. Guarantee and liability The instrument parts and functions are guaranteed for two years, starting from the date of delivery . This guarantee remains valid if defective components are submitted. We reserve the right to exchange, modify or repair the equipment.
1 1. EC-Declaration of conformity This product fulfils all relevant guideline regulations 94/9/EG for equipment and protective systems in potentially explosive areas. The granted EC certificate of conformity confirms that the product complies with all relevant norms and fundamental health and safe- ty regulations.
12. EC-Certificate of conformity 18 BAL H-4 DC A 4spr. DIN A 6 22.02.2002 11:07 Uhr Seite 18.
19 BAL H-4 DC A 4spr. DIN A 6 22.02.2002 11:07 Uhr Seite 19.
ecom instruments GmbH Industriestr . 2 D-97959 Assamstadt T el.: + 49 (0) 62 94 / 42 24-0 Fax: + 49 (0) 62 94 / 42 24-90 E-Mail: sales@ecom-ex.com Internet: www .
An important point after buying a device Leupold H-4 DC A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Leupold H-4 DC A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Leupold H-4 DC A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Leupold H-4 DC A you will learn all the available features of the product, as well as information on its operation. The information that you get Leupold H-4 DC A will certainly help you make a decision on the purchase.
If you already are a holder of Leupold H-4 DC A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Leupold H-4 DC A.
However, one of the most important roles played by the user manual is to help in solving problems with Leupold H-4 DC A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Leupold H-4 DC A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
