Instruction/ maintenance manual of the product CD-163 Lenoxx Electronics
Go to page of 26
IB-CD163(T A)-FREDS-E-042602 ® COMP ACT DISC PLA YER AM/FM DUAL CASSETTE RECORDER WITH REMOTE CONTROL MODEL CD-163 INCLUDES FULL FEA TURE REMOTE CONTROL MUL TI-COLORED FLUORESCENT DISPLA Y PLA YS MUSIC COMP ACT DISCS KARAOKE FUNCTION WITH DUAL MIC.
IB-CD163(T A)-FREDS-E-042602 TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IB-CD163(T A)-FREDS-E-042602 ADDITIONAL SAFETY INSTRUCTIONS 1 . Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2 . Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
IB-CD163(T A)-FREDS-E-042602 1 . Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2 . Do not dispose the batteries into a fire. The cells may explode.
IB-CD163(T A)-FREDS-E-042602 CHOOSING THE POWER SOURCES Y ou can use AC power or batteries as a power source. TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plugs are polarized and only fit one way into the wall outlet and back of the set.
IB-CD163(T A)-FREDS-E-042602 A TT ACHING THE SPEAKERS 1.Bring one of the speakers to the right side of the set. 2. Align the rails of the speaker box with the main set as shown in FIG.1. 3 . When speaker align with the rails, push the speaker into the rails as shown in FIG.
IB-CD163(T A)-FREDS-E-042602 REMOTE CONTROL Y ou can control the CD PLA YER with the provided REMOTE CONTROL (including the functions of POWER ON/OFF , MUTE, VOLUME control, CD REPEA T and PLA Y features).
IB-CD163(T A)-FREDS-E-042602 PLA YING A CD 1 Press the POWER switch, the VFD display will turn on and the ST ANDBY lamp will go off. 1 3 Open the CD DOOR by pressing the right corner marked OPEN/CLOSE and place the CD in the CD compartment. The label side of the CD should face upward.
IB-CD163(T A)-FREDS-E-042602 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback will flash during pause.
IB-CD163(T A)-FREDS-E-042602 REPEA T PLA Y PLA YING CD SONGS (TRACKS) OVER AND OVER T o repeat Press a single track (song) Press the REPEA T button once all the tracks (all songs) Y ou can play CD tracks over and over in normal or programmed play modes (see page 10).
IB-CD163(T A)-FREDS-E-042602 10 Y ou can make a program of up to 19 tracks to play in the order you want them to be played. PROGRAM PROGRAMMED CD PLA Y SELECTING YOUR OWN MUSIC PLA YING ORDER NOTE : Programming is only done during stop mode and with REMOTE CONTROL.
IB-CD163(T A)-FREDS-E-042602 LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (see page 4). Set the FUNCTION switch to RADIO position. 1 2 3 1 2 3 Set the BAND switch to the proper band position (AM or FM), and set the FM MODE switch to STEREO or MONO.
IB-CD163(T A)-FREDS-E-042602 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Press or Set Adjust the volume VOLUME control ( or ). TIP • If the FM broadcast is noisy , set the FM MODE switch from STEREO to MONO. Turn off the Radio Set the FUNCTION switch to T APE position or press the POWER switch.
IB-CD163(T A)-FREDS-E-042602 PLA YING A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button (DECK A or DECK B) to open the tape compartment and insert a recorded tape. Close the door . 4 2 2 3 Press the PLA Y button.
IB-CD163(T A)-FREDS-E-042602 RELA Y PLA Y 3 2 4 Press the cassette P AUSE button on DECK B. 3 1 Press the cassette PLA Y button on DECK A, DECK A will play . 5 Connect the supplied AC power cord or batteries (see page 4). T o play tapes in DECK A and then DECK B, follow the steps below: Press the cassette PLA Y button on DECK B.
IB-CD163(T A)-FREDS-E-042602 USE THESE BUTTONS FOR ADDITIONAL CASSETTE T APE OPERA TIONS To Stop playback Eject the cassette Press or Adjust Adjust the volume Fast forward or rewind the tape F AST FOR WARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause.
IB-CD163(T A)-FREDS-E-042602 RECORDING ON A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button (DECK B) to open the tape compartment and insert a blank tape. Select the program source (AM, FM, CD, or microphone) you want to record.
IB-CD163(T A)-FREDS-E-042602 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the power Press the STOP/EJECT button and press the POWER switch, the VFD display will go off and the ST ANDBY lamp will turn on. TIP Press or Set Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording.
IB-CD163(T A)-FREDS-E-042602 SINGING ALONG WITH KARAOKE FUNCTION Connect the supplied AC power cord or batteries (see page 4). 2 3 4 5 Insert microphone plugs into the microphone jacks.
IB-CD163(T A)-FREDS-E-042602 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Adjust the RIGHT & LEFT channel output. Press or Adjust Adjust the MIC volume MIC VOLUME VOLUME control VOLUME CONTROL 19 Adjust the sound effects for low and high tones.
IB-CD163(T A)-FREDS-E-042602 PRECAUTIONS On Safety As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet.
IB-CD163(T A)-FREDS-E-042602 PRECAUTIONS (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
IB-CD163(T A)-FREDS-E-042602 MAINTENANCE Cleaning the Lens If the lens becomes dirty , it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower .
IB-CD163(T A)-FREDS-E-042602 TROUBLE SHOOTING Problem Remedy The power is not on. Connect the AC power cord to a wall outlet securely . Make sure the batteries are inserted correctly and they are fresh. There is no sound. Make sure the FUNCTION switch is at the right position as you want.
IB-CD163(T A)-FREDS-E-042602 SPECIFICA TION General Description Power source: AC 120V , 60Hz 22Watts DC 8 size D batteries for set DC 2 size AAA batteries for Remote Control (Alkaline batteries are recommended) Speakers (2 ways): an d 2 - 5 4 ohm woofers 2 - 3 4 ohm tweeters with crossover Output power: 5.
IB-CD163(T A)-FREDS-E-042602 © 2002 LENOXX ELECTRONICS CORP . 2 GERMAK DRIVE CARTERET , N.J. 07008 MADE & PRINTED IN CHINA For customer service Dial 1-800-315-5885 (MONDA Y - THURSDA Y 9:00 AM - 5:00 PM, FRIDA Y 9:00 AM - 1:00 PM EST) or Visit Our Website : http://www .
An important point after buying a device Lenoxx Electronics CD-163 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenoxx Electronics CD-163 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenoxx Electronics CD-163 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenoxx Electronics CD-163 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenoxx Electronics CD-163 will certainly help you make a decision on the purchase.
If you already are a holder of Lenoxx Electronics CD-163, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenoxx Electronics CD-163.
However, one of the most important roles played by the user manual is to help in solving problems with Lenoxx Electronics CD-163. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenoxx Electronics CD-163 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
