Instruction/ maintenance manual of the product CD-90 Lenoxx
Go to page of 16
® MODEL CD-90 OPERA TING INSTRUCTIONS PLEASE READ CAREFULL Y BEFORE USE AM/FM DIGIT AL RADIO CD PLA YER WITH 2 0 SECOND ESP PLUS TM DIGIT AL AM/FM RECEIVER 5 AM & 5 FM PRESET ST A TION BU.
ACCESSORIES INCLUDED AC ADAPTOR STEREO HEADPHONES INTRODUCTION Y our new Lenoxx Sound Model CD-90 portable compact disc player with digital radio, uses the latest technology to give you crisp clean sound from all your compact discs, and digital AM/FM radio reception.
LOCA TION OF CONTROLS 24 1 21 23 2 3 7 5 20 6 8 9 16 1 . 5 AM & 5 FM MEMORY PRESET BUTTONS 2 . RADIO MEMORY STORE BUTTON 3 . AM/FM BAND BUTTON 4 . RADIO LCD DISPLA Y 5 . RADIO TUNING UP BUTTON 6 . RADIO TUNING DOWN BUTTON 7 . CD DOOR 8 . PHONES JACK (headphone jack) 9.
POWER SOURCES 1. Using Battery Power TIPS ON BA TTER Y USE Reversing polarities will damage the batteries and possibly your set. Be sure to follow polarity ( + and - ) as indicated. Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.
2. Using AC W all Outlet Power Y our player may be powered from any household 120V AC outlet, using the AC adaptor included. Insert the adaptors small connector plug into the DC 4.5V Jack marked on player (on the rear of the set), and plug the adaptor into an AC outlet.
DISC PLA YING 4 Adjust the V olume. 1 Load the Disc. 2 Connect the Headphones. 3 Press the PLA Y/P AUSE Button. Push here Disc Label side up Press to open T o PHONES Stereo headphones PLA Y/P AUSE but.
Other Operations Operation Press Display window shows T o pause play T o release pause and resume play T o stop T o skip to the next track(s) T o skip to the previous track(s) once (or repeatedly) once (or repeatedly) T o go ahead at high speed (search) Keep depressed and release when the desired music section of the disc is found.
Single T rack Repeat Plays one song over and over till you press ST OP . During play , select the song you want to repeat with either of the SEARCH buttons ( or ), then press the REPEA T/RANDOM button once, the symbol 1 appears in the display .
The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you prefer (up to 20 tracks can be programmed). Programming Example: Program Number 1 2 3 4 5 6 7 8 Track Number (song number) 3 5 8 1 2 4 1 1 etc. etc. PROGRAMMING YOUR OWN PLA Y During programming, the word PROG flashes in the display .
This set is designed with 20 second ESP (Electronic Shock Protection) PLUS TM - which allows virtually unlimited gentle skip protection, and 20 second normal shock protection. Press the ESP button to turn on the ESP PLUS TM system. Press it again to turn it off.
Listening to Presetted Stations (after you programmed them) Presetting Stations UP TO 5 AM AND 5 FM ST A TIONS CAN BE STORED INT O THE PRESET MEMORIES. (THEY WILL REMAIN IN MEMORY AS LONG AS THE BA TTERIES ARE INST ALLED, OR AC POWER CORD IS CONNECTED.
Cleaning the Cabinet Wipe with a soft cloth. If the cabinet is very dirty , dampen (not dripping wet) the cloth with a weak solution of soapy water , and then wipe clean. Cleaning the Lens A dirty lens will cause sound skipping. If the lens is very dirty , the player may not work.
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer servicing to qualified service personnel only . Do not insert pins or coins, clips, or any objects inside the set. This set is equipped with a safety device which automatically turns the laser beam off when the disc door is opened.
Since the CD circuitry may cause interference to other radios nearby , switch this set off when not in use or move it away from the affected radios. This device complies with Part 15 of the FCC Rules.
TROUBLE SHOOTING GUIDE Symptoms Causes Solutions Tracks do not change or set does not play normally . Batteries are weak (they may test OK on tester but they are weak for CD operation).
TECHNICAL SPECIFICA TIONS CD Player Section 15 Frequency response .............................. Wow and flutter ...................................... Sampling frequency ................................ D/A converter .................................
An important point after buying a device Lenoxx CD-90 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenoxx CD-90 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenoxx CD-90 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenoxx CD-90 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenoxx CD-90 will certainly help you make a decision on the purchase.
If you already are a holder of Lenoxx CD-90, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenoxx CD-90.
However, one of the most important roles played by the user manual is to help in solving problems with Lenoxx CD-90. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenoxx CD-90 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
