Instruction/ maintenance manual of the product LXH-GJ17L3 Lenovo
Go to page of 18
Contents CERTIFICATIONS -------------------------------------------------------------------- 2 NOTICE ---------------------------------------------------------------------------------- 2 PRECAUTIONS -.
CE certificate This shipped version of this device complies with the requirements of the EEC directive 89/336/EEC “Electromagnetic compatib ility” and 73/23/EEC “Low voltage directive”.
PRECA UTIONS z Do not use the monitor near water, e.g. near a bathtub, w ashbowl, kitchen sink, laundry tub, sw imming pool or in a wet basement. z Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and c ause serious damage to the appliance.
SPECIA L NOTES ON LCD MONITORS The following symptoms are normal w ith LCD monitor and do not indicate a problem. NOTES • You may find slightly uneven br ightness on the screen depending on the desktop pattern you use. • The LCD screen has effective pixels of 99.
INSTALLATION INSTRUCTIONS SWIVEL BASE Install Remove Figure 1 Installing and Removing the Swivel Base 1. During installation, place the display base the right-w ay up on a flat surface. Place upper part of the display slow ly on to the base and w ait for the click signifying that it is completely in pl ace.
CONTROLS A ND CONNECTORS Ad ap t e r Connecting the ad apter: Connect one end of the adapter to back of the monitor and connect the other end to the power cord. Pow er cord Connecting the power cord: Connect one end of the power cord to the AC adapter and connect the other end to the power supply (90V-264V AC Voltage).
A DJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’ s angle to your ow n preference. • Hold the stand so you do not t opple the monitor when you change the monitor’s angle.
OPERATING INSTRUCTIONS GENERA L INSTRUCTIONS Press the power sw itch to turn the m onitor on or off. The other control knobs are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjust ed to your personal preferences.
FRONT PA NEL CONTROL • Pow er / Pow er indicator : Press this knob to switch ON/OFF of monitor’s pow er. and display the monitor’s state. Blue — Powe r On mode. Orange — Power Off mode. • MENU/ENTER / : Activate OSD menu or function adjusts confirmation.
HOW TO USE OSD The main menu will be displayed as follow s (see figure 5). If OSD window is in Chinese when pow er on, press ▲ or ▼ to choose the next window . Choose the English, then press MENU Key . for confirming. OSD window w ill display in English.
3.1 FOCUS Adjust the picture Focus. 3.2 CLOCK Adjust the picture Clock. 4. LANGUAGE Multi-Language selection. 5. OSD TIMER Choose OSD window display time. 6. COLOR TEMPERATURE 6.1 7800K/6500K (COLOR TEMPERATURE) The color temperature for 7800K is x=0.
Green monitor • The monitor has a power saving f unction that conforms to the VESA standard. When the comput er input no signal, the monitor will enter the shuts off mode.
TECHNICA L SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the Pow er Switch is in the ON position *Power Cord should be connected *Check the Power socket. *Replace new Pow er Cord. No picture, the LED indicator is light up *The Signal Cable should be completely connected to the computer.
Screen image is not centered or sized properly. *Adjust pixel frequency (CLOCK) and FOCUS or press hot-key (AUTO). Picture has color defects *Adjust RGB color or select color temperature (white does n.
ERROR MESSA GE & POSSIBLE SOLUTION NO SIGNA L INPUT 1. T he computer is switched off. 2. T he computer is dormancy. CA BLE NOT CONNECTED : 1. Check that the signal-cable is pr operly connected, If the connector is loose, tighten the connector’s screws.
A PPENDIX A SPECIFICA TIONS Type TFT Color LCD Size 43.2cm(17") LCD Panel Pixel pitch 0.264mm( H ) x 0.264mm( V ) Video R,G,B Analog Interface Separate Sync. H/V TTL H-Frequency 30kHz - 80kHz Input V-Frequency 50Hz-75Hz Display Colors 16.2M Colors Dot Clock 135MHz Max.
A PPENDIX B FA CTORY PRESET TIMING TABLE STANDARD RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY Dos-modo 720 × 400 31.47kHz 70Hz 640 × 480 31.47kHz 60Hz 640 × 480 37.861kHz 72Hz VGA 640 × 480 37.50kHz 75Hz 800 × 600 37.879kHz 60Hz 800 × 600 48.
A PPENDIX C CONNECTOR PIN A SSIGNMENT 15 6 10 11 15 Figure 6 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Ground 3. Blue 11. Ground 4. Ground 12. DDC-Serial Data 5. Ground 13. H-Sync 6. R-Ground 14.
An important point after buying a device Lenovo LXH-GJ17L3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenovo LXH-GJ17L3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenovo LXH-GJ17L3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenovo LXH-GJ17L3 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenovo LXH-GJ17L3 will certainly help you make a decision on the purchase.
If you already are a holder of Lenovo LXH-GJ17L3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenovo LXH-GJ17L3.
However, one of the most important roles played by the user manual is to help in solving problems with Lenovo LXH-GJ17L3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenovo LXH-GJ17L3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
