Instruction/ maintenance manual of the product SMX3000RMHV2UNC APC
Go to page of 20
Operation Manual Smart-UPS ® X Uninterruptible Power Supply Low V olt age (100-127 V) SMX2000RML V2U SMX2200RML V2U SMX3000RML V2U SMX3000RML V2UNC SMX3000RMJ2U High V olt age (200-240 V) SMX2200RMHV.
.
1 Smart-UPS X 2000/2200/3000 VA Overview About the UPS The APC ® by Schneider Electric Smart-UPS ® X is a high performa nce un interruptible power supply (UPS). It provides protection for electronic equipm ent from utility power black outs, brownouts, sags, and surges; small utility fluctuations and large dist urbances.
Smart-UPS X 2000/2 200 /3000 VA 2 Rear p anel S pecifications Operating Conditions This unit is intended for indoor use only . Select a location sturdy enough to supp ort the weight of the UPS and XLBP. Do not operate the unit where there is excessive dust, or the temperature or humidity are outside the specified limits.
3 Smart-UPS X 2000/2200/3000 VA Inst allation UPS For UPS installation information, see the Smar t-UPS X 2000-3000 V A Quick-Start that is included with the UPS.
Smart-UPS X 2000/2 200 /3000 VA 4 Operation Connect Equipment to the UPS Note: The UPS will charge to 90% capacity in th e first three hours of normal operation. Do not expect full battery runtime capability during this initial charge period. 1. Connect equipment to the outlets on the rear panel of the UPS .
5 Smart-UPS X 2000/2200/3000 VA Display Interface Overview Using the display interface Use the U P and D OWN buttons to scroll through th e main menu options. Press E NTER to view the sub-menus under each main menu option. Press E SCAPE to exit a sub-menu and return to a main menu.
Smart-UPS X 2000/2 200 /3000 VA 6 Load (A) x Load meter (kWh) x Last transfer to battery power information x x Battery charge and estimated run time x x Battery volta ge x Number of external battery p.
7 Smart-UPS X 2000/2200/3000 VA About General information about the UPS, including: model num bers, output voltage setting, serial numb er , manufacture date, replacement battery cartr idge information, firmware versions, and suggest ed batt ery replacement date.
Smart-UPS X 2000/2 200 /3000 VA 8 Configuration UPS Settings St art-up Settings Use the display interface to configure these settings at initial start -up. The UPS will prompt for a response to each setting, if no response is given, the default setting will be used.
9 Smart-UPS X 2000/2200/3000 VA General Settings Configure these settings at any time, usin g the display interface, APC PowerChute ® software, or a network management card.
Smart-UPS X 2000/2 200 /3000 VA 10 Audible Alarm On On/Off The UPS will neve r beep if all audible alarms are set to Off or wh en th e di splay buttons are pressed.
11 Smart-UPS X 2000/2200/3000 VA Switched Outlet Group s Overview The Switched Outlet Groups can be conf igured to independently turn of f, turn on, shut down, put to sleep, and reboot conn ected equipment.
Smart-UPS X 2000/2 200 /3000 VA 12 Network Management Card Settings These settings are available only on units that have a Network Management Card (NMC).
13 Smart-UPS X 2000/2200/3000 VA Emergency Power Off EPO Overview The Emergency Power Of f (EPO) option is a safety feature that will immediately disconnect all connected equipment from utility po wer . The UPS will immediately shut down and will not switch to battery powe r .
Smart-UPS X 2000/2 200 /3000 VA 14 T roubleshooting Problem and P ossible Cause Solution The UPS will not turn on or ther e is no output The unit has not been turned on. Press the ON button to tu rn on the UPS. The UPS is not connected to utility power .
15 Smart-UPS X 2000/2200/3000 VA Service and Support Service If the unit requires service, do not re turn it to the dealer . Follow these steps: 1. Review the T r oubleshooting section of the manual to eliminate common problems. 2. If the problem persists, contact APC Cust omer Sup port through the APC W eb site, www .
Smart-UPS X 2000/2 200 /3000 VA 16 Smart-UPS Factory W arranty LIMITED W ARRAN TY American Power Conversion (APC ) warrants its Smart-UPS (Produc ts) to be free from defects in materials and workmanship for a period of three (3) years, excluding the batteries, which are warranted for two (2) years from date of purchase.
.
09/201 1 990-3651C APC W orldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • V isit the APC W eb site to acce ss documents in the APC Knowledg e Base and to submit customer support requests.
An important point after buying a device APC SMX3000RMHV2UNC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought APC SMX3000RMHV2UNC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data APC SMX3000RMHV2UNC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, APC SMX3000RMHV2UNC you will learn all the available features of the product, as well as information on its operation. The information that you get APC SMX3000RMHV2UNC will certainly help you make a decision on the purchase.
If you already are a holder of APC SMX3000RMHV2UNC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime APC SMX3000RMHV2UNC.
However, one of the most important roles played by the user manual is to help in solving problems with APC SMX3000RMHV2UNC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device APC SMX3000RMHV2UNC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
